PNST 166-2016
ПНСТ 166-2016
|
|
Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements
Арматура трубопроводная класса безопасности 4 для технологических систем атомных станций. Общие технические требования
Status: Not effective - Expired
This standard establishes general technical requirements for shut-off, return, control, shut-off and control and safety valves for technological systems of nuclear power plants (AC), classified as Safety Class 4 according to [1], with nominal diameters from 6 to 3200 mm, intended for operation at temperatures from minus 50 ° С to 550 ° С and pressures up to 25 MPa on liquid and gaseous (including vapor) media, specified by the operating organization, the body parts of which are made of metal. This standard can be used to assess (confirm) the conformity of products
Настоящий стандарт устанавливает общие технические требования к запорной, обратной, регулирующей, запорно-регулирующей и предохранительной трубопроводной арматуре для технологических систем атомных станций (АС), отнесенной к классу безопасности 4 по [1], с номинальными диаметрами от 6 до 3200 мм, предназначенной для эксплуатации при температурах от минус 50 °С до 550 °С и давлениях до 25 МПа на жидких и газообразных (в т. ч. на паре) средах, задаваемых эксплуатирующей организацией, корпусные детали которой выполнены из металла. Настоящий стандарт может быть использован для оценки (подтверждения) соответствия выпускаемой продукции
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/25/2016
SKU: RUSS303965
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.1 For nuclear power »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.01 Pipe fittings in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.01 Pipe fittings in general »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.01 Nuclear power engineering in general »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.01 Nuclear power engineering in general »
The Document References:
Federal Law 170-FZ: On technical inspection of vehicles and on amendments to certain legislative acts of the Russian Federation
Federal Law 412-FZ: On accreditation in the national accreditation system
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 18620-86: Electrotechnical articles
GOST 2.114-2016: Unified system for design documentation. Specifications
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21557-83: The bushings and rings for metallic bellows. General specifications
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 26291-84: Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 3.1109-82: Unified system for technological documentation. Terms and definitions of main concepts
GOST 30331.1-2013: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics, definitions
GOST 32137-2013: Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9544-2015: Pipeline valves. Leakage rates of valves
GOST IEC 60332-1-2-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50618-93: Metal single layer bellows for compensation. Types, general specifications
GOST R 53674-2009: Pipeline valves. Nomenclature of characteristics. Check-lists for design and order
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
The Document is Referenced By:
RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.