PR 32.131-98
ПР 32.131-98
|
|
Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport
Правила по метрологии. Типовая программа обучения калибровщиков средств измерений геометрических величин на железнодорожном транспорте
Status: Effective - Introduced for the first time
The training program for calibrators of geometric measurement tools is intended for the training of specialists of metrological services of railways, enterprises and organizations accredited for the right to carry out calibration in the railway calibration system (CERC). The program is designed to train specialists of the MS of the railways to calibrate specialized SI used on the railways, both for the initial training and for the periodic retraining of calibrators with experience.
Программа обучения калибровщиков средств измерений геометрических величин предназначена для подготовки специалистов метрологических служб железных дорог, предприятий и организаций, аккредитованных на право проведения калибровки в железнодорожной системе калибровки (СКЖД). Программа предназначена для подготовки специалистов МС железных дорог по калибровке специализированных СИ, применяемых на железных дорогах, как для первоначальной подготовки, так и для периодической переподготовки калибровщиков, имеющих опыт работы.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Railways of the Russian Federation,
3/30/1999
SKU: RUSS304200
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.2 Organization of activities of metrological services »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.1 Basic requirements for testing laboratories and their activities »
PromExpert »
SECTION I. TECHNICAL REGULATION »
IV Conformity assessment of products and services »
3 Requirements for certification bodies and testing laboratories. Accreditation »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
The Document References:
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 16263-70: State system for ensuring the uniformity of measurements. Metrology. Terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 2015-84: Fixed plain gauges. Technical requirements
GOST 21401-75: Plain limit gauges for dimensions up to 500 mm. Required dimensions
GOST 24853-81: Plain gauges for dimensions to 500 mm. Tolerances
GOST 24997-81: Gauges for metric threads. Tolerances
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 3749-77: Checking 90° squares. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.050-73: State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measurements
GOST 8.051-73: The State Measurement System. Errors allowed when measuring linear dimensions from 1 to 500 mm
GOST 8.057-80: State system for providing the uniformity of measurements. Main provisions
GOST 8.061-73: The State Measurement System. Content and construction of verification schemes
GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8.395-80: Standard measurement conditions for calibration
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST 8.563.1-97: Measurement of liquids and gases flow rate and quantity by differential pressure method orifice plates, nozzles isa 1932 and ventury tubes inserted in circular cross-section filled conduits.
GOST 8.563.2-97: Measurement of liquids and gases flow rate and quantity by differential pressure method measurement procedure by orifice instruments official edition
GOST 8.563.3-97: Procedure and module of calculations software
MI 1552-86: State system for ensuring uniformity of measurements. Single straight measurements. Evaluation of measurement errors
MI 1799-87: Guidelines. Squares testing 90 degrees. Control method
MI 187-86: Guidelines. State system for ensuring uniformity of measurements. Reliability and requirements for calibration methods of measuring instruments
MI 188-86: Guidelines. State system for ensuring uniformity of measurements. Means of measurement. Establishing the values of the parameters of calibration methods
MI 1904-88: Threaded cylindrical gauges. Methods of control
MI 1919-88: Lever shackles. Method of verification
MI 1927-88: Recommendation. Calibers are smooth for cylindrical shafts and holes
MI 2083-90: Indirect measurements. Determination of the measurement results and the estimation of their errors
MI 2273-93: Scope of use of instruments , which are subject to calibration
MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons
MI 732-85: State system for ensuring uniformity of measurements. Automated systems of energy accounting and control based on IISEZ. Method of verification
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
PR 50.2.005-94: National Measurement Standards. Procedures for Licensing Activity for the Manufacture, Repair, Sales, and Leasing of Measuring Devices
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.013-97: GSOEI. The procedure for accreditation of the metrological services of legal entities to the right of certification of measurement procedures and metrological examination of documents
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
RD 32.31-2000: Metrological support. The procedure of metrological control and supervision at enterprises and organizations of the federal railway transport
RD 32.42-2001: Organization and procedure for accreditation of units of the Metrology Service of the Federal Railway Transport
RD 50-160-79: Methodological instructions. Implementation and application of СТ СЭВ 1052-78 "Metrology. Physical quantity measurement units."
RD 50-453-84: Procedural Guidelines for Error Characteristics of Measuring Devices Under Actual Operating Conditions. Calculation Methods
RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).
The Document is Referenced By:
PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
