RMD 32-24-2015 Sankt-Peterburg
РМД 32-24-2015 Санкт-Петербург
|
|
Design of artificial structures at transport facilities in St. Petersburg
Проектирование искусственных сооружений на объектах транспорта в Санкт-Петербурге
Status: Effective - Introduced for the first time
The regional methodological document is used in the development of project documentation for the construction of new, reconstruction, overhaul and repair of existing artificial structures at transport facilities in St. Petersburg: bridges for the load from motor vehicles (permanent bridges, overpasses, racks, traffic interchanges); drawbridges; embankments; combined bridges and overpasses for automobile and rail loads; tunnel type transport facilities; retaining walls. The document contains requirements for the composition and content of design work, the procedure for developing project documentation, requirements for initial data for designing artificial structures at transport facilities in St. Petersburg, taking into account the requirements for cultural heritage objects (historical and cultural monuments) of the peoples of the Russian Federation, and also recommended for regional application.
Региональный методический документ применяется при разработке проектной документации для строительства новых, реконструкции, капитального ремонта и ремонта существующих искусственных сооружений на объектах транспорта в Санкт-Петербурге: мостовых сооружений под нагрузку от автотранспортных средств (постоянных мостов, путепроводов, эстакад, транспортных развязок); разводных мостов; набережных; совмещенных мостов и путепроводов под автомобильную и рельсовую нагрузку; транспортных сооружений тоннельного типа; подпорных стен. В документе приведены требования к составу и содержанию проектных работ, порядку разработки проектной документации, требования к исходным данным для проектирования искусственных сооружений на объектах транспорта в Санкт-Петербурге, с учетом требований к объектам культурного наследия (памятникам истории и культуры) народов Российской Федерации, а также положений, рекомендуемых к применению на региональном уровне.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee for the Construction of the Government of St. Petersburg,
5/12/2016
SKU: RUSS305004
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of St. Petersburg »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.1.6.2309-07: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12445-80: Hydraulic and pneumatic drives and lubricating systems. Nominal pressures
GOST 12446-80: Hydraulic and pneumatic drives and lubricating systems. Nominal frequencies of rotation
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 1412-85: Flakish graphite cast iron
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16514-96: Hydraulic fluid power. Hydraulic cylinders. General technical requirements
GOST 16517-82: Hydraulic devices
GOST 16770-86: Tanks for positive-displacement hydraulic drives and lubrication systems. General technical requirements
GOST 17411-91: Positive-displacement hydraulic drives
GOST 18464-96: Hydraulic fluid power. Hydraulic cylinders. Acceptance rules and test methods
GOST 19672-74: Cylindrical worm gear pairs. Modules and coefficients of worm diameter
GOST 20522-2012: Soils. Methods of statistical treatment of test results
GOST 21150-87: Litol-24 grease
GOST 21354-87: Cylindrical evolvent gears of external engagment. Strength calculation
GOST 22976-78: Hydraulic drives, pneumatic actuators and lubrication systems
GOST 24451-80: Highway tunnels. Construction and equipment clearance diagrams
GOST 25100-2011: Soils. Classification
GOST 25546-82: Hoisting cranes. Work conditions
GOST 25835-83: Lifting capacity cranes. Duty classifications of mechanisms
GOST 26600-98: Navigation waterways signs. General specifications
GOST 26607-85: System of ensuring of geometrical parameters accuracy in construction. Functional tolerances
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26775-97: Clearances of navigable bridge spans in the inland waterways. Norms and technical requirements
GOST 26804-2012: Metal road safety barriers. Specifications
GOST 2688-80: Two lay rope type ЛК-Р construction 6x19 (1+6+6/6)+1 o.c. Dimensions
GOST 30321-95: Hoisting cranes. Safety requirements for hydraulic equipment
GOST 3088-80: Two lay polystranded rope type ЛК-Р construction 18x19 (1+6+6/6)+1 o.с. Dimensions
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 3241-91: Steel ropes
GOST 3778-98: Lead. Specifications
GOST 613-79: Tin foundry bronzes. Grades
GOST 7668-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions
GOST 805-95: Steelmaking pig iron. Specifications
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9563-60: Basic norms for interchangeability. Modules of gears
GOST 977-88: Steel castings. General specifications
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 50597-93: Automobile roads and streets. The requirements to the level of maintenance. Satisfied the traffic safety
GOST R 51256-2011: Traffic control devices. Road marking. Classification. Technical requirements
GOST R 51943-2002: Acoustical barriers for transport noise reduction. Experimental methods for determination of insertion loss
GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators
GOST R 52398-2005: Classification of automobile roads. General parameters and requirements
GOST R 52399-2005: Geometric elements of automobile roads
GOST R 52606-2006: Traffic control devices. Classification of barriers
GOST R 52607-2006: Traffic control devices. Roadside barriers. General technical requirements
GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches
GOST R 52766-2007: Automobile roads of general use. Road facilities. General requirements
GOST R 52892-2007: Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 53964-2010: Mechanical vibration. Measurements of vibration in structures. Guidance on measurement methods
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements
MDS 81-35.2004: Methodology
to determine the cost of construction products in the Russian Federation
MGSN 5.02-99: Design of Urban Bridge Structures
ODM 218.2.007-2011: Guidelines for the design of measures to ensure the access of persons with disabilities to road facilities
ODM 218.2.018-2012: Guidelines for determining the required fleet of road maintenance equipment for the maintenance of roads in the development of projects for the maintenance of roads
ODN 218.017-2003: Guide to Assessment of Transport Operational Condition of Bridge Structures
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
RTM 24.090.12-76: Lifting cranes. Shafts and axles. Calculation methods
SanPiN 2.1.2.729-99: Polymer and polymer containing construction. Materials. Products and structures. Hygienic requirements
SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas
SanPiN 2.1.7.1287-03: Sanitary-epidemiologic requirements to soil quality
SanPiN 2.2.3.1384-03: Hygienic requirements to organizations of civil execution and civil works
SanPiN 2.2.4.1191-03: Physical factors of the production environment. Electromagnetic fields in production environment
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.05.06-85: Electrical devices
SP 122.13330.2012: Railway and highway tunnels
SP 131.13330.2012: Building climatology
SP 16.13330.2011: Steel structures
SP 2.6.1.2612-10: Basic sanitary rules for radiation safety
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 24.13330.2011: Pile foundations
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 3.13130.2009: Systems of fire protection. System of annunciation and management of human evacuation at fire. Requirements of fire safety
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 52.13330.2011: Natural and artificial lighting
SP 59.13330.2012: Accessibility of buildings and structures for persons with disabilities and persons with reduced mobility
SP 6.13130.2013: Systems of fire protection. Electrical equipment. Requirements of fire safety
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 7.13130.2013: Heating, ventilation and air conditioning. Fire Safety Requirements
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
SP 98.13330.2012: Tram and trolleybus lines
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 32-302-2003: Pedestrian Crossings off of Roads. Small Retail Sales and Service Facilities in Pedestrian Crossings. City of Moscow
TSN 50-302-2004: Designing the foundations of buildings and structures in St. Petersburg
VSN 103-74: Technical instructions for design of road intersections and junctions
VSN 4-81: Inspection Guidelines to Road Overpasses and Underpasses
|
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
