RMD 40-20-2016 Sankt-Peterburg
РМД 40-20-2016 Санкт-Петербург
|
|
Installation of water supply and drainage networks in St. Petersburg
Устройство сетей водоснабжения и водоотведения в Санкт-Петербурге
Status: Effective - Supersedes. Updated edition of RMD 40-20-2013 St. Petersburg
The document contains guidelines for technical customers, design and construction organizations for constructing and reconstructing the existing water supply and wastewater networks in St. Petersburg from the outlet stop valves of the city’s waterworks to water metering stations, buildings and structures, as well as from control wells to reception chambers of sewage treatment plants of the city, with the exception of the objects specified in Article 48.1 of the Town Planning Code of the Russian Federation.
В документе содержатся методические указания для технических заказчиков, проектных и строительных организаций по устройству новых и реконструкции существующих сетей водоснабжения и водоотведения на территории Санкт-Петербурга от выходных запорных задвижек водопроводных станций города до водомерных узлов учета, зданий и сооружений, а также от контрольных колодцев до приемных камер очистных сооружений города, за исключением объектов, указанных в статье 48.1 Градостроительного кодекса РФ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee for the Construction of the Government of St. Petersburg,
7/11/2016
SKU: RUSS305006
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of St. Petersburg »
As a Replacement Of:
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
Federal Law 190-FZ: About heat supply
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
Federal Law 416-FZ: About water supply and sanitation
Federal Law 69-FZ: Fire Safety
Federal Law 7-FZ: Environmental Protection
GOST 10006-80: Metal pipes
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10708-82: Pendulum impact machines
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 1497-84: Metals. Methods of tension test
GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16310-80: Welded joints of polyethylene, polypropylene and polyvinyl chloride. Main types, design elements and dimensions
GOST 166-89: Vernier callipers. Specifications
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20426-82: Radiation methods of defectoscopy
GOST 21.110-95: System of building design documents Rules of developing specifications for equipment, products and materials
GOST 21.704-2011: System of design documents for construction. Rules for execution of working documentation of outside networks of water supply and sewerage
GOST 23667-85: Non-Destructive Testing Ultrasonic Flaw Detectors Methods for Measuring the Main Parameters
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST 25.603-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 27077-86: Thermoplastic fitting. Methods of determination of the fittings appearance alteration after heating
GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating
GOST 27208-87: Cast iron casting. Methods of mechanical testing
GOST 32972-2014: Plastic manholes for sewerage and drainage systems. Specifications
GOST 3634-99: Access manhole covers and storm-flow Receivers for manholes Technical requirements
GOST 4648-71: Plastics. Method of static bending test
GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST ISO 1167-1-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 1. General method
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 21.1101-2013: System of design documents for construction. Main requirements for design and working documents
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 52134-2003: Pressure thermoplastic pipes and their jointing elements for water-supply and heating systems. General specifications
GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54808-2011: Pipeline valves. Leakage rates of valves.
GOST R 54866-2011: Thermoplastics pipes. Determination of the long-term hydrostatic strength on pipe samples by extrapolation method
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
GOST R ISO 10467-2013: Glass-reinforced thermosetting plastics piping systems based on unsaturated polyester resins for pressure and non-pressure drainage and sewerage. General technical requirements
GOST R ISO 12176-1-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion
GOST R ISO 12176-2-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 2. Electrofusion
GOST R ISO 2531-2008: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
Manual for SN 550-82: Manual for the design of technological pipelines from plastic pipes
MDK 3-02.2001: Regulations of engineering maintenance of systems and buildings of public water supply and sewerage
PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
Resolution 1284: Rules of non-discriminatory access to infrastructure for placing telecommunication networks
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
RMD 11-22-2013 Sankt-Peterburg: Guide to project preparation of capital construction in St. Petersburg
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SN 550-82: Specification for plastic process pipeline design
SP 24.13330.2011: Pile foundations
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 33.13330.2012: Steel pipelines strength analysis
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
SP 45.13330.2012: Earth structures, bases and foundations
SP 48.13330.2011: Organization of construction
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
TSN 30-305-2002: Urban planning. Reconstruction and development of non-central areas of St. Petersburg
TSN 30-306-2002: Reconstruction and development of historically developed areas of St. Petersburg
TSN 50-302-2004: Designing the foundations of buildings and structures in St. Petersburg
VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
