imgalt

SP 127.13330.2017

СП 127.13330.2017

Landfills for the disposal and burial of toxic industrial wastes. Basic provisions on design

Свалки для захоронения и захоронения токсичных промышленных отходов. Основные положения по дизайну

Status: Effective

The set of rules applies to the design of landfills for the disposal and disposal of toxic industrial waste. The code of rules does not apply to landfills for the disposal of radioactive and biological waste.

Свод правил распространяется на проектирование полигонов по обезвреживанию и захоронению токсичных промышленных отходов. Свод правил не распространяется на полигоны по захоронению радиоактивных и биологических отходов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 11/14/2017

SKU: RUSS305479

Price: $295.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Reference documents » Reference guidelines to SNiP »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 3 Hazardous Waste Management » 3.3 Requirements for waste management in implementation of activities » 3.3.2 Requirements for waste producers in carrying out waste management activities » 3.3.2.3 Requirements for collection, storage, processing and disposal of waste »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 3 Hazardous Waste Management » 3.3 Requirements for waste management in implementation of activities » 3.3.2 Requirements for waste producers in carrying out waste management activities » 3.3.2.1 Requirements for design, construction, reconstruction, conservation and liquidation of facilities »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 1 Air Protection » 1.3 Requirements for protection of atmospheric air in carrying out activities » 1.3.2 Requirements for protection of atmospheric air during design, placement, construction, reconstruction and operation of facilities »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.030 Waste » 13.030.01 Waste in general »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.030 Waste » 13.030.01 Waste in general »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.030 Waste » 13.030.30 Special waste »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.030 Waste » 13.030.40 Installations and equipment for waste disposal and treatment »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.040 Construction » 91.040.20 Commercial and industrial buildings »


The Document is Replaced With:

SP 127.13330.2023: Facilities for disposal of industrial waste. Basic design provisions

As a Replacement Of:

SNiP 2.01.28-85: Disposal areas for treatment and burial of toxic industrial wastes. Basic design provisions

SP 127.13330.2011: Disposal and disposal sites for toxic industrial waste. Design Guidelines

The Document References:

Code 74-FZ: Water Code of the Russian Federation

Federal Law 123-FZ: Privatization of Government Property and the Foundations for Privatization of Municipal Property in the Russian Federation

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being

Federal Law 7-FZ: Environmental Protection

Federal Law 89-FZ: Production and Consumption Wastes

GOST 17.5.1.01-83: Nature protection. Land reclamation. Terms and definitions

GOST 30772-2001: Resources saving. Waste treatment. Terms and definitions

Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation

SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects

SN 551-82: Guidelines for the Design and Construction of Percolation-Proof Assemblies Made of Polyethylene Film for Manmade Water Reservoirs

SNiP 2.01.28-85: Disposal areas for treatment and burial of toxic industrial wastes. Basic design provisions

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 42.13330.2011: Urban development. Urban and rural planning and development

The Document is Referenced By:

SP 18.13330.2019: Production facilities. Planning organization of the land plot

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 99/pr: On the approval of the Plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes of practice for 2021.

SP 18.13330.2019: Production facilities. Planning organization of the land plot (Master plans of industrial enterprises) SNiP II-89-80 *

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!