imgalt

SP 340.1325800.2017

СП 340.1325800.2017

Reinforced concrete and concrete structures of cooling towers. Design rules

Железобетонные и бетонные конструкции градирен. Правила оформления

Status: Effective - Introduced for the first time

The set of rules establishes requirements for the design of reinforced concrete cooling towers and extends to the design of evaporative cooling towers with exhaust towers made of monolithic reinforced concrete and fan cooling towers of precast and monolithic reinforced concrete belonging to the class of structures KS-2, KS-3 according to GOST 27751. for the design of structures intended for construction in seismic areas, in the Northern building-climatic zone, in areas of subsidence, swelling and weak physico-mechanical properties of soils without additional compliance requirements such structures relevant regulations

Свод правил устанавливает требования к проектированию железобетонных градирен и распространяется на работы по проектированию испарительных градирен с вытяжными башнями из монолитного железобетона и вентиляторных градирен из сборного и монолитного железобетона, относящихся к классу сооружений КС-2, КС-3 по ГОСТ 27751. Свод правил не распространяется на проектирование сооружений, предназначенных для строительства в сейсмических районах, в Северной строительно-климатической зоне, в районах распространения просадочных, набухающих и слабых по физико-механическим свойствам грунтов без соблюдения дополнительных требований, предъявляемых к таким сооружениям соответствующими нормативными документами

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 10/23/2017

SKU: RUSS305551

Price: $662.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


The Document References:

Federal Law 184-FZ: About technical regulation

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications

GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 27037-86: Paint materials. Method of determination of stability to temperature changes

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 28575-2014: Corrosion protection in construction. Structural concrete. Test of vapour permeability of coatings

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31384-2008: Structural concrete protection against corrosion. General requirements

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 31993-2013: Paint materials. Determination of film thickness

GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs

GOST 9.045-75: Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination

GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

Order 262: Regulatory requirements for the application of methods and schemes for ventilating coal mines

Order 262: Federal Aviation Regulations "Requirements for aerodromes intended for take-off, landing, taxiing and parking of civil aircraft"

RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures

Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation

SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications

SP 131.13330.2012: Building climatology

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 20.13330.2016: Loads and actions

SP 22.13330.2016: Soil bases of buildings and structures

SP 24.13330.2011: Pile foundations

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 28.13330.2017: Protection against corrosion of construction

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures

SP 47.13330.2016: Engineering survey for construction. Basic principles

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures

SP 58.13330.2012: Hydraulic Structures. Basic statements

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!