imgalt

ST TsKBA 008-2014

СТ ЦКБА 008-2014

Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

Арматура трубопроводная. Расчет и оценка надежности и безопасности на этапе проектирования

Status: Effective

The standard applies to pipeline valves of all types and types used at production facilities of all industries and establishes a method for calculating and evaluating the values of reliability indicators (reliability and durability) and safety indicators (designated indicators) of valves, its components and actuators for it at the design stage . The standard was developed in accordance with GOST 27.301. The provisions of the standard, defining additional or special requirements for valves for nuclear power plants (NPPs), are shown in italics in the text.

Стандарт распространяется на трубопроводную арматуру всех видов и типов, применяемую на производственных объектах всех отраслей промышленности и устанавливает методику расчета и оценки значений показателей надежности (безотказности и долговечности) и показателей безопасности (назначенных показателей) арматуры, ее узлов и приводных устройств к ней на этапе проектирования. Стандарт разработан в соответствии с ГОСТ 27.301. Положения стандарта, определяющие дополнительные или специальные требования к арматуре для атомных станций (АС), выделены в тексте курсивом.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: SJSC NPF TsKBA, 3/26/2015

SKU: RUSS305782

Price: $1,156.00

imgalt

The Product is Contained in the Following Classifiers:

Organization Standards » Standards NPF TsKBA »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.4 Reliability and safety calculations »

Standards for pipe fittings (TPA) » 1. Fundamental standards for injection molding machines » 1.3 Reliability and safety »


As a Replacement Of:

ST TsKBA 008-2011: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 2.105-95: General requirements for writing documents

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles

GOST 27.310-95: Dependability in techniques. Failure mode, effects and criticality analysis. Basic principles

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST R 51901.12-2007: Risk management. Procedure for failure mode and effects analysis

GOST R 54123-2010: Safety of machinery and equipment. Terms, definitions and basic indications of safety

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

PB 03-182-98: Safety Requirements for Aboveground Storage Facilities for Liquid Ammonia

PNAE G-01-011-97: General Safety Regulations for nuclear thermal power plants (SSB 88/97). Also known as NP-001-97.

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 024-2006: Pipe fittings. Determination of residual life and reliability indicators

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 027-2006: Pipe fittings. Heat treatment of parts from non-ferrous alloys based on copper and nickel. Typical process

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 043-2008: Pipe fittings. Procedure of rationing and control of reliability and safety

ST TsKBA 049-2009: Pipe fittings. Ensuring reliability in manufacturing

ST TsKBA 055-2008: Pipe fittings. Valves valves with fluoroplast-4 seal and composite materials. Technical requirements and methods of mounting the sealing rings

ST TsKBA 058-2008: Pipe fittings. Gaskets of paronite and rubber. Sizes and technical requirements

ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements

ST TsKBA 064-2008: Pipe fittings. Fluoroplast-4 gaskets and composite materials based on it. Sizes and technical requirements

ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

The Document is Referenced By:

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!