GOST 11679.1-2018
ГОСТ 11679.1-2018
|
|
Rubber-metal instrument shock-absorbers. Specifications
Амортизаторы резинометаллические приборные. Технические условия
Status: Effective - Supersedes. IUS 12-2018
This standard applies to rubber-metal device plate and pan shock absorbers, designed for vibration isolation and protection from shock equipment. Shock absorbers made of rubber based on natural rubber (NC) are efficient at ambient temperatures from minus 45 ° C to plus 80 ° C in various climatic conditions. Shock absorbers made of rubber based on synthetic rubber (SC) are efficient at ambient temperatures from minus 55 ° C to plus 80 ° C in various climatic conditions. Shock absorbers are efficient in a dry and humid tropical climate and correspond to group II according to GOST 15152
Настоящий стандарт распространяется на резинометаллические приборные пластинчатые и чашечные амортизаторы, предназначенные для виброизоляции и защиты от ударных воздействий оборудования. Амортизаторы, изготовленные из резин на основе натурального каучука (НК), работоспособны при температуре окружающей среды от минус 45 °С до плюс 80 °С в различных климатических условиях. Амортизаторы, изготовленные из резин на основе синтетического каучука (СК), работоспособны при температуре окружающей среды от минус 55 °С до плюс 80 °С в различных климатических условиях. Амортизаторы работоспособны в условиях сухого и влажного тропического климата и соответствуют группе II по ГОСТ 15152
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/9/2018
SKU: RUSS353412
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.99 Other rubber and plastic products »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.99 Other rubber and plastic products »
As a Replacement Of:
GOST 11679.1-76: Rubber-metal shock-absorbers for instruments. Specifications
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 11679.2-76: Rubber-metal shock-absorbers for instruments. Fitting. Specifications
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 13808-79: Rubber. Method for the determination of low temperature resistance according to elastic rebound after compression
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST 2060-2006: Brass rods. Specifications
GOST 209-75: Rubber and glue. Methods of determination of metal bond strength at tearing
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 33781-2016: Consumer packaging made of cardboard, paper and combined materials. General specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 7912-74: Rubber. The method for the determination of brittle temperature
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination
GOST 9396-88: Boxes wooden reusable
GOST 9569-2006: Paraffined paper. Specifications
Order 242: Federal classification catalog of waste
Resolution 390: Fire safety rules in the Russian Federation
SP 12.13130.2009: Determination of categories of rooms, buildings and external installations for explosion and fire hazards
The Document is Referenced By:
GOST 11679.2-2019: Rubber-metal instrument dampers. Fittings. Technical specifications
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.