GOST 22233-2018

ГОСТ 22233-2018

Aluminium alloy extruded sections for translucent envelopes. Specifications

Профили прессованные из алюминиевых сплавов для ограждающих конструкций. Технические условия

Status: The document is enacted from 01.09.2019. Registration information 604-st dated 09/14/2018 (Rosstandart official website) 09/01/2019

The standard applies to profiles of aluminum alloys HELL 31, 6060, 6063, made by hot pressing and intended for use in enclosing structures of buildings and structures, including translucent walling. The requirements of the standard apply to semi-finished profiles and finished profiles, including the combined (profiles), with the diameter of the circumcircle (for combined profiles - with the total circumference of the circumference) up to 350 mm inclusive.

Стандарт распространяется на профили из алюминиевых сплавов АД 31, 6060, 6063, изготовленные методом горячего прессования и предназначенные для применения в ограждающих конструкциях зданий и сооружений, в том числе светопрозрачных ограждающих конструкциях. Требования стандарта распространяются на профили-полуфабрикаты и готовые профили, в т. ч. на комбинированные (профили), с диаметром описанной окружности (для комбинированных профилей — с общим диаметром описанной окружности) до 350 мм включительно.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: Federal Agency for Technical Regulation and Metrology, 9/14/2018

SKU: RUSS353466

Price: $316.80




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.5 Non-ferrous metal products »

ISO classifier » 77 METALLURGY » 77.150 Non-ferrous metal products » 77.150.10 Aluminum products »

National standards » 77 METALLURGY » 77.150 Non-ferrous metal products » 77.150.10 Aluminum products »


As a Replacement Of:

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

The Document References:

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10354-82: Polyethylene film Specifications

GOST 10929-76: Reagents. Hydrogen peroxide. Specifications

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 11739.11-98: Aluminium casting and wrought alloys. Methods for determination of magnesium

GOST 11739.12-98: Aluminium casting and wrought alloys. Methods for determination of manganese

GOST 11739.13-98: Aluminium casting and wrought alloys. Methods for determination of copper

GOST 11739.1-90: Aluminium casting and wrought alloys. Methods for determination of aluminium oxide

GOST 11739.20-99: Aluminium casting and wrought alloys. Methods for determination of titanium

GOST 11739.21-90: Aluminium casting and wrought alloys. Methods for determination of chromium

GOST 11739.24-98: Aluminium casting and wrought alloys. Methods for determination of zinc

GOST 11739.6-99: Aluminium casting and wrought alloys. Methods for determination of iron

GOST 11739.7-99: Aluminium casting and wrought alloys. Methods for determination of silicon

GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications

GOST 13624-90: Extruded rectangular flanged channel-section shapes of aluminium and magnesium alloys. Dimensions

GOST 14192-96: Cargo marking

GOST 1497-84: Metals. Methods of tension test

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 16295-93: Anticorrosion paper

GOST 166-89: Vernier callipers. Specifications

GOST 16711-84: Paraffin paper base

GOST 18477-79: Universal containers

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications

GOST 2228-81: Paper for bags

GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy

GOST 24047-80: Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test

GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 2912-79: Chrome oxide technical. Technical conditions

GOST 29309-92: Coating of lacquers and paints. Determination of strength under the tension

GOST 29319-92: Paints and varnishes. Visual comparison of the colour of paints

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 31014-2002: Glass filled poliamides profils. Specifications

GOST 3560-73: Sealing tepe

GOST 3749-77: Checking 90° squares. Specifications

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 5100-85: Soda ash technical. Technical conditions

GOST 515-77: Bitumized and tarred packaging paper

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 6507-90: Micrometers. Specifications

GOST 6552-80: Reagents. Orthophosphoric acid. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7727-81: Aluminium alloys. Methods of spectral analysis

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings

GOST 9.031-74: Unified system of corrosion and ageing protection. Anode-oxide coatings for semifinished products made out of aluminium and alloys. General requirements and methods of control

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage

GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications

GOST 9569-2006: Paraffined paper. Specifications

The Document is Referenced By:

GOST 23747-2015: Door blocks of aluminium profiles. Specifications

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58883-2020: Hinged facade ventilated systems. General rules for calculating substructures

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!