GOST 26429-2018
ГОСТ 26429-2018
|
|
Steel structures of suspended transport tracks. Specifications
Конструкции стальные путей подвесного транспорта. Технические условия
Status: Effective - Supersedes. IUS 12-2018
This standard applies to steel structures of overhead transport span spans 3.0; 4.0; 5.5 and 6.0 m, suspended from steel and reinforced concrete structures of industrial buildings and open crane racks with a calculated seismicity of up to 9 points inclusive and operated at a temperature not higher than plus 100 degrees Celsius and not less than minus 60 degrees Celsius. The beams are designed for suspended cranes, electric rope and manual mobile worm hoists, cats with hoists suspended from them with a lifting capacity of up to 5 tons inclusive
Настоящий стандарт распространяется на стальные конструкции путей подвесного транспорта пролетами 3,0; 4,0; 5,5 и 6,0 м, подвешиваемые к стальным и железобетонным конструкциям промышленных зданий и открытых крановых эстакад с расчетной сейсмичностью до 9 баллов включительно и эксплуатируемые при температуре не выше плюс 100 градусов по Цельсию и не ниже минус 60 градусов по Цельсию. Балки предназначены для подвесных кранов, электрических канатных и ручных передвижных червячных талей, кошек с подвешенными к ним талями грузоподъемностью до 5 т включительно
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/25/2018
SKU: RUSS353490
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
As a Replacement Of:
GOST 26429-85: Steel structures of suspended transport tracks. Specifications
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10906-78: Square taper washers. Specifications
GOST 11371-78: Washers. Specifications
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions
GOST 19822-88: Industrial container. Specifications
GOST 23118-2012: Building steel structures. General specifications
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 26047-2016: Building steel structures. Symbols (marks)
GOST 27017-86: Fasteners. Terms and definitions
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 8239-89: Steel hot-rolled I-beams
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B
SP 16.13330.2017: Steel structures
SP 28.13330.2017: Protection against corrosion of construction
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
