GOST 34385-2018
ГОСТ 34385-2018
|
|
Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
Буксы и адаптеры для колесных пар тележек грузовых вагонов. Общие технические условия
Status: Effective - Introduced for the first time. IUS 8-2018
This standard applies to axle boxes and their components, adapters and composite adapters, as well as any other components of two-axle three-element bogies according to GOST 9246, located between the outer rings of wheelset bearings and
Настоящий стандарт распространяется на буксы и их составные части, адаптеры и составные адаптеры, а также любые другие составные части двухосных трехэлементных тележек по ГОСТ 9246, расположенные между наружными кольцами подшипников колесных пар и опорными и/или упорными поверхностями проемов для колесных пар в боковых рамах, и устанавливает общие технические требования, правила приемки и методы контроля. Допускается применение настоящего стандарта для букс и их составных частей, адаптеров и составных адаптеров трехосных и четырехосных тележек грузовых вагонов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/24/2018
SKU: RUSS353635
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
The Document References:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18572-2014: Rolling bearings. Axle box cylindrical roller bearings for rolling stock. Specification
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19200-80: Iron and steel castings. Terms and definitions of defects
GOST 2.106-96: Unified system for design documentation. Text documents
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 27208-87: Cast iron casting. Methods of mechanical testing
GOST 27611-88: Cast iron. Photoelectrical special method of analysis
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 32769-2014: Rolling bearings. Taper bearing unit for rolling stock axle boxes. Specification
GOST 32894-2014: Railway application. Inspection control. General provisions
GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties
GOST 3325-85: Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits
GOST 380-2005: Common quality carbon steel. Grades
GOST 4728-2010: Axle billets for railway rolling stock. Specifications
GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications
GOST 9378-93: Roughness comparison specimens
GOST 977-88: Steel castings. General specifications
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
The Document is Referenced By:
GOST 34763.1-2021: Three- and four axle bogies for railroad freight wagons. General specifications
GOST R 58720-2019: Carts, side frames, nadressorny beams and connecting special freight-type cars. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
