GOST 34468-2018
ГОСТ 34468-2018
|
|
Center plates for freight cars of 1520 mm track gauge railways. General specifications
Пятники грузовых вагонов железных дорог колеи 1520 мм. Общие технические условия
Status: The document is enacted from 01.07.2021. Registration information 932-st dated November 6, 2018 (official website of Rosstandart) 07/01/2021
The standard applies to monitors and center plates places of freight cars of 1520 mm gauge railways and establishes general technical requirements, acceptance rules and control methods. The standard does not apply to specialized conveyor cars.
Стандарт распространяется на пятники и пятниковые места грузовых вагонов железных дорог колеи 1520 мм и устанавливает общие технические требования, правила приемки и методы контроля. Стандарт не распространяется на специализированные вагоны-транспортеры.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/6/2018
SKU: RUSS353700
The Product is Contained in the Following Classifiers:
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
The Document References:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19200-80: Iron and steel castings. Terms and definitions of defects
GOST 19281-2014: High strength rolled steel. General specification
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 32894-2014: Railway application. Inspection control. General provisions
GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4728-2010: Axle billets for railway rolling stock. Specifications
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 977-88: Steel castings. General specifications
GOST R 2.610-2019: Unified system of design documentation. Rules for the implementation of operational documents
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
The Document is Referenced By:
GOST 10674-2022: Tank wagons. General specifications
GOST 10935-2022: Covered freight cars. General specifications
GOST 26686-2022: Flatcars. General specifications
GOST 26725-2022: Open wagons. General technical conditions
GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
GOST 34710-2021: Stops for automatic couplers of freight and passenger cars. General specifications
GOST 5973-2022: Dumper cars. General specifications
GOST R 58720-2019: Carts, side frames, nadressorny beams and connecting special freight-type cars. General specifications
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.