imgalt

GOST 5520-2017

ГОСТ 5520-2017

Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

Прокат толстолистовой из нелегированной и легированной стали для котлов и сосудов, работающих под давлением. Технические условия

Status: Effective - Supersedes. IUS 3-2018

The standard applies to rolled hot-rolled steel from unalloyed and alloyed steel manufactured in sheets from 4 to 160 mm thick inclusively, in a heat-treated, thermomechanically-treated condition or without heat treatment, suitable for welding and intended for the manufacture of parts of boilers and pipes and pipelines and equipment of TPP and NPP, working under pressure at low, elevated temperatures and at a temperature of (20 15-10) ° С.

Стандарт распространяется на прокат толстолистовой горячекатаный из нелегированной и легированной стали, изготовляемый в листах толщиной от 4 до 160 мм включительно, в термически обработанном, термомеханически обработанном состоянии или без термической обработки, пригодный для сварки и предназначенный для изготовления подведомственных Ростехнадзору деталей котлов и сосудов, трубопроводов и оборудования ТЭС и АЭС, работающих под давлением при пониженных, повышенных температурах и при температуре (20+15-10)°С.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/21/2017

SKU: RUSS353721

Price: $240.00



imgalt

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.30 Steels for working under pressure »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.30 Steels for working under pressure »


As a Replacement Of:

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 14019-2003: Metallic materials. Bend test method

GOST 1497-84: Metals. Methods of tension test

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19903-2015: Hot-rolled sheet. Range

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 33439-2015: Metal products, ferrous metals and alloys on iron-nickel and nickel-based. Heat treatment terms and definitions

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST R 54384-2011: Steel. Definition and classification by chemical composition and classes of quality

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

The Document is Referenced By:

GOST 10674-2022: Tank wagons. General specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 16106-2019: Coke chemical naphthalene. Technical conditions

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!