GOST 7566-2018
ГОСТ 7566-2018
|
|
Metal product. Rules of acceptance, marking, packing, transportation and storage
Металлопродукция. Правила приемки, маркировка, упаковка, транспортирование и хранение
Status: Effective - Supersedes. IUS 10-2018
This standard establishes requirements to the rules of acceptance, marking, packing, transportation and storage of the following types of metal products from ferrous metals and alloys:- blooms, slabs, ingots and hot-rolled, forged, and continuous-cast billets;- flat rolled products in sheet and rolls, including those obtained by longitudinal cutting (hot-rolled, cold-rolled, with metal and polymeric coatings), and the strip, including the strip from electrotechnical anisotropic and isotropic steel;- section rolled products (including wire rods), reinforcing, shaped, calibrated (cold-drawn), round with special finishing of the surface, and polished;- oll-formed shapes.The standard does not apply to pipe products and roll-formed closed welded shapes, to which the requirements to the rules of acceptance, marking, packing, transportation and storage according to GOST 10692 apply.
Настоящий стандарт устанавливает требования к правилам приемки, маркировки, упаковки, транспортировки и хранения следующих видов металлических изделий из черных металлов и сплавов: - блюмы, слябы, слитки и горячекатаные, кованые и непрерывнолитые заготовки; плоский прокат в листах и рулонах, в том числе полученных путем продольной резки (горячекатаный, холоднокатаный, с металлическими и полимерными покрытиями), а также полосы, в том числе полосы из электротехнической анизотропной и изотропной стали; - сортовой прокат (в том числе проволочные прутки), армирующие, фасонные, калиброванные (холоднотянутые), круглые со специальной отделкой поверхности и полированные; - профилированные в виде заготовок. Стандарт не распространяется на изделия из труб и рулонные замкнутые сварные формы, к которым Применяются требования к правилам приемки, маркировки, упаковки, транспортировки и хранения по ГОСТ 10692.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
8/22/2018
SKU: RUSS353740
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.01 Iron and steel products in general »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.01 Iron and steel products in general »
As a Replacement Of:
GOST 7566-94: Metal products
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10692-2015: Steel and cast iron pipes and fittings. Acceptance, marking, packing, transportation and storage
GOST 14192-96: Cargo marking
GOST 14350-80: Roll-formed section. Terms and definitions
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17527-2014: Packaging. Terms and definitions
GOST 19281-2014: High strength rolled steel. General specification
GOST 20799-88: Industrial oils Specifications
GOST 21391-84: Means for the palletization. Terms and definitions
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 26653-2015: Preparation of general cargoes for transportation. General requirements
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30136-95: Carbon steel rod of ordinary quality. Technical specifications
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 3560-73: Sealing tepe
GOST 515-77: Bitumized and tarred packaging paper
GOST 5530-2004: Packing and technical fabrics made of bast fibres. General specifications
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 6009-74: Hot-rolled steel strip. Specifications
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9569-2006: Paraffined paper. Specifications
GOST 9998-86: Polyvinylchloride films for household use. General specifications
The Document is Referenced By:
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 34636-2020: Pipe billet. General specifications
GOST 34649-2020: Cold-rolled steel thin-sheet products, galvanized with polymer coating from continuous lines. Specifications
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications
GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
GOST R 59687-2022: Metal panels with foam insulation. General technical specifications
GOST R 59689-2022: Three-layer chrysotile cement panels with foam insulation. General technical conditions
GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions
GOST R 70726-2023: Modular swimming pools. General technical conditions
PNST 391-2020: High-strength steel packaging tape. Technical specifications
PNST 594-2022: Oil and gas industry. Underwater production systems. Metallic materials
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
SP 470.1325800.2019: Steel structures. Work Rules
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.