GOST 9.401-2018
ГОСТ 9.401-2018
|
|
Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
Единая система защиты от коррозии и старения. Покрытия лакокрасочные. Общие требования и методы ускоренных испытаний на стойкость к воздействию климатических факторов
Status: Effective - Supersedes. IUS 11-2018
This standard establishes the general requirements and methods for accelerated testing of paint coatings on metallic and non-metallic surfaces of products intended for operating conditions and categories of atmospheres with corrosivity according to GOST 9.104 (except B5), types of atmosphere according to GOST 15150
Настоящий стандарт устанавливает общие требования и методы ускоренных испытаний лакокрасочных покрытий металлических и неметаллических поверхностей изделий, предназначенных для условий эксплуатации и категорий атмосфер с коррозионной активностью по ГОСТ 9.104 (кроме В5), типов атмосферы по ГОСТ 15150
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/13/2018
SKU: RUSS353757
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.60 Organic Coatings »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.60 Organic Coatings »
As a Replacement Of:
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
The Document References:
GOST 10144-89: Enamels XB-124Specifications
GOST 10277-90: Putties. Specifications
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.016-79: Work area air
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.3.005-75: Painting works
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 1347-77: Varnish БТ-783. Specifications
GOST 13744-87: Fluoroplast-3. Specifications
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 18099-78: Enamels ML-152. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 19024-79: Enamels AC-182. Specifications
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 23101-78: Silicon-organic thermostable enamel KO-58. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23640-79: Enamels MЛ-197. Specifications
GOST 23750-79: Artificial weather apparatus with xenon emitters. General technical requirements
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 24927-81: Electronic products. General requirements to the temporary corrosion protection and test methods
GOST 25129-82: Primer GF-031. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25515-82: Enamels НЦ-256. Specifications
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 28196-89: Water-dispersion paints
GOST 28205-89: Basic environmental testing procedures. Part 2. Tests. Guidance for solar radiation testing
GOST 28246-2017: Coating materials. Terms and definitions
GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications
GOST 30333-2007: Chemical production safety passport. General requirements
GOST 31149-2014: Paint and varnish materials. Determination of adhesion by the method of cross-cut
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 32299-2013: Paint materials. Pull-off test for adhesion
GOST 32702.2-2014: Paint materials. Determination of adhesion by X-cut test method
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications
GOST 5494-95: Pigmentary aluminium. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 64-77: Enamels ГФ-230 BЭ. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 7930-73: Enamels НЦ-1125. Specifications
GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.045-75: Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination
GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance
GOST 9.072-2017: Unified system of protection against corrosion and aging. Paint coatings. Terms and Definitions
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9.409-88: Unified system of corrosion and ageing protection. Paint coatings. Methods of accelerated tests for the resistance to the effect of petroleum products
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9151-75: Enamels of types ГФ-92. Specifications
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST 9825-73: Paint materials. Terms, definitions and designations
GOST 9980.2-2014: Paints and varnishes and raw materials for them. Sampling, monitoring and preparation of samples for testing
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
SP 991-72: Sanitary regulations when painting using manual sprayers
STB ISO 2808-2016: Paints and varnishes. Measurement of layer thickness
The Document is Referenced By:
GOST 34183-2017: Оil and oil products trunk pipeline transportation. Oil centrifugal pumps. General specifications
GOST 34388-2023: Steel pipes. Test method for corrosion resistance in salt spray
GOST 34564-2019: The main pipeline transport of oil and oil products. Gear pumps. General specifications
GOST 34565-2019: The main pipeline transport of oil and oil products. Piston and plunger pumps. General specifications
GOST 34667.6-2021: Paint and varnish materials. Corrosion protection of steelwork using coating systems. Part 6. Laboratory test methods
GOST 34667.9-2021: Paint and varnish materials. Corrosion protection of steelwork using coating systems. Part 9. Paint and varnish protection systems for marine and similar structures and laboratory test methods
GOST 9.403-2022: Unified system of protection against corrosion and aging (USPCS). Paint and varnish coatings. Test methods for resistance to static action of liquids
GOST R 22.3.14-2018: Safety in emergency situations. Collective protective equipment. Air cleaning devices filtering. General technical requirements. Test methods
GOST R 22.3.15-2018: Safety in emergency situations. Collective protective equipment. Air regeneration devices. General technical requirements. Test methods
GOST R 51559-2022: Power oil transformers of 110 and 220 kV voltage classes and autotransformers of 27,5 kV voltage class for AC traction railway power supply systems. General specifications
GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements
GOST R 54828-2022: Complete gas-insulated metal-insulated switchgear (GIS) for rated voltages of 110 kV and above. General specifications
GOST R 55818-2018: Polymer base decorative coats for faсade’s thermo-insulation composite systems with external mortar’s lays. Specifications
GOST R 56350-2015: Intelligent transport systems. Indirect management of traffic flow. Requirements for variable message sign
GOST R 58216-2018: Oil and gas industry. Arctic operations. Marine Corrosion Protection
GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
GOST R 58351-2019: General automobile roads. Frontal road fences, holding lateral combined and holding pedestrian. General technical requirements. Testing and control methods. Application rules
GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods
GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications
GOST R 58674-2019: Oil vessels and oil berths. Electrostatic and galvanic intrinsic safety. General technical requirements
GOST R 58684-2019: Fireproof ship doors. General specifications
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions
GOST R 58702-2019: Guides Safety Requirements and Test Methods
GOST R 58707-2019: Board electronic game for volleyball, basketball, football, handball with a protective screen. Technical requirements and test methods
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 58936-2020: Optics and Photonics. Endoscopes and medical endotherapeutic devices. General technical requirements and test methods
GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements
GOST R 70087-2022: Water-dispersion paints for facade thermal insulation composite systems with exterior plaster layers. Technical specifications
GOST R 70320-2022: Charging and charging converters and uninterruptible power supply devices for railway traction substations, transformer substations and linear devices of railway traction power supply system. General specifications
GOST R 70573-2022: Cladding elements, nodes and fastening details of facade hinged ventilated structures. Durability parameters
GOST R 70595-2022: Shipboard fittings. General specifications
GOST R 9.319-2024: Unified system of protection against corrosion and aging. Protective inorganic protectant coatings on zinc-silicate base. General technical conditions
GOST R 9.404-2022: Unified system of protection against corrosion and aging (USPCS). Protective organic coatings. Coating systems based on polyethylene powder compositions. General specifications
PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications
PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements
PNST 408-2020: Green standards. Nanomodified paint and varnish materials with antibacterial effect. Criteria and indicators for confirming the conformity of "green" products
SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.