GOST R 55412-2018
ГОСТ Р 55412-2018
|
|
Facade’s thermo-insulation composite systems with external plaster layers. Test methods
Системы фасадные теплоизоляционные композиционные с наружными штукатурными слоями. Методы испытаний
Status: Effective - Supersedes. IUS 5-2018
This standard applies to façade heat-insulating composite systems with external plaster layers (SFCF), classified according to GOST 33739 and defined according to GOST 33740, and establishes test methods for fully-formed SFCA and their individual layers by the definition of the following indicators: - SFTK impact strength; - impact strength of the base reinforced plaster layer; - water absorption with capillary suction; - adhesion strength (adhesion) of SFTK layers; - frost resistance of the contact zone of SFTK; - coefficient of vapor permeability of the material of layers SFTK
Настоящий стандарт распространяется на фасадные теплоизоляционные композиционные системы с наружными штукатурными слоями (СФТК), классифицируемые по ГОСТ 33739 и определяемые по ГОСТ 33740, и устанавливает методы испытаний полностью сформированных СФТК и их отдельных слоев по определению следующих показателей: - ударная прочность СФТК; - ударная прочность базового армированного штукатурного слоя; - водопоглощение при капиллярном подсосе; - прочность сцепления (адгезия) слоев СФТК; - морозостойкость контактной зоны СФТК; - коэффициент паропроницаемости материала слоев СФТК
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/20/2018
SKU: RUSS354008
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
As a Replacement Of:
GOST R 55412-2013: Faсade’s thermo insulation composite systems with external mortar’s lays. Test methods
The Document References:
GOST 10733-98: Mechanical hand and pocket watches. General specifications
GOST 14791-79: Sealing non-hardening
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 23683-89: Hard petroleum paraffines
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 31189-2015: Dry building binder mixes. Classification
GOST 32314-2012: Factory made mineral wool products used for thermal insulation of buildings. General specifications
GOST 33739-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST 34275-2017: Alkali-resistant reinforcing glass fibre meshes for building faces. Method for determination of the mechanical properties
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6709-72: Distilled water. Specifications
GOST EN 1609-2011: Thermal insulating products for building applications. Methods for determination of short term water absorption by partial immersion
GOST EN 826-2011: Thermal insulating products for building applications. Methods for determination of compression behaviour
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 55936-2018: Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications
The Document is Referenced By:
GOST R 55936-2018: Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 55943-2018: Systems facade composite insulation with outer plaster layers. Methods for determining and assessing climate resistance
GOST R 58892-2020: Primer compositions for facade thermal insulation composite systems with external plaster layers. General specifications
GOST R 58937-2020: A decorative and protective finishing layer made of piece materials for facade thermal insulation composite systems with external plaster layers. Specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
