GOST R 55936-2018
ГОСТ Р 55936-2018
|
|
Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications
Составы клеевые, базовые штукатурные, выравнивающие шпаклевочные на полимерной основе для фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями. Технические условия
Status: Effective - Supersedes. IUS 5-2018
This standard applies to adhesive, basic plastering and leveling putty compounds based on aqueous polymer dispersions, produced industrially, mixed immediately before use with cement (portland cement, white cement), intended for the device of adhesive and reinforced base plastering and leveling putty layers in the composition of the systems facade insulation composite with outer plaster layers (SFC) used in construction, reconstruction and remo those buildings. This standard establishes the technical requirements for the factory (supplied by the manufacturer), mortar (formed after mixing with cement) and hardened compositions
Настоящий стандарт распространяется на клеевые, базовые штукатурные и выравнивающие шпаклевочные составы на основе водных полимерных дисперсий, выпускаемые промышленным способом, смешиваемые непосредственно перед применением с цементом (портландцемент, белый цемент), предназначенные для устройства клеевого и армированного базового штукатурного и выравнивающего шпаклевочного слоев в составе систем фасадных теплоизоляционных композиционных с наружными штукатурными слоями (СФТК), применяемые при строительстве, реконструкции и ремонте зданий и сооружений. Настоящий стандарт устанавливает технические требования к заводским (поставляемым предприятием-изготовителем), растворным (образующимся после смешения с цементом) и затвердевшим составам
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/20/2018
SKU: RUSS354012
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.99 Other building materials »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.99 Other building materials »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh16 Finishing and facing materials »
As a Replacement Of:
GOST R 55936-2014: Polymer-cement base adhesives, base coats and patching putties for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
The Document References:
GOST 10733-98: Mechanical hand and pocket watches. General specifications
GOST 14192-96: Cargo marking
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 33739-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Classification
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 6613-86: Square meshed woven wire gauzes
GOST 8.579-2002: State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing
GOST EN 1607-2011: Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 55412-2018: Facade’s thermo-insulation composite systems with external plaster layers. Test methods
GOST R 57270-2016: Building materials. Methods for combustibility tests
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
The Document is Referenced By:
GOST R 55412-2018: Facade’s thermo-insulation composite systems with external plaster layers. Test methods
GOST R 58937-2020: A decorative and protective finishing layer made of piece materials for facade thermal insulation composite systems with external plaster layers. Specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
