imgalt

GOST R 58064-2018

ГОСТ Р 58064-2018

Steel welded pipes for building structure. Technical specifications

Трубы стальные сварные. Для строительных конструкций. Технические условия

Status: Effective - Introduced for the first time. IUS 4-2018

This standard applies to welded steel pipes intended for the manufacture of building structures used for the construction of various civil and industrial facilities operating at a temperature not higher than 100 ° C and not lower than minus 60 ° C. This standard does not apply to pipes intended for the manufacture of steel structures of bridges, transport tunnels, as well as to culverts under the embankments of roads and railways. In cases of using pipes in structures that are in special operating conditions (for example, blast furnace constructions; main and technological pipelines; special purpose tanks; structures of buildings exposed to seismic effects, intensive effects of temperature, radiation, corrosive environments; structures of hydrotechnical and land-improvement facilities) constructions of unique buildings and structures, buildings of nuclear power plants, as well as special types of structures (for example, a preliminary a tense, space, hanging), should comply with additional requirements under the relevant regulations, which reflect the features of these structures

Настоящий стандарт распространяется на трубы стальные сварные, предназначенные для изготовления строительных конструкций, применяемых для сооружения различных объектов гражданского и промышленного назначения, работающих при температуре не выше 100 °С и не ниже минус 60 °С. Настоящий стандарт не распространяется на трубы, предназначенные для изготовления стальных конструкций мостов, транспортных тоннелей, а также на водопропускные трубы под насыпями автомобильных и железных дорог. В случаях применения труб в конструкциях, находящихся в особых условиях эксплуатации (например, конструкциях доменных печей; магистральных и технологических трубопроводов; резервуаров специального назначения; конструкциях зданий, подвергающихся сейсмическим воздействиям, интенсивным воздействиям температуры, радиации, агрессивных сред; конструкциях гидротехнических и мелиоративных сооружений), конструкциях уникальных зданий и сооружений, зданий атомных электростанций, а также специальных видах конструкций (например, предварительно напряженных, пространственных, висячих), следует соблюдать дополнительные требования, предусмотренные соответствующими нормативными документами, в которых отражены особенности работы этих конструкций

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 1/30/2018

SKU: RUSS354039

Price: $700.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Welding regulations » Pipelines »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.75 Steel pipes and tubes for special purposes »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.75 Steel pipes and tubes for special purposes »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V62 Steel pipes and their connecting parts »


The Document References:

GOST 10006-80: Metal pipes

GOST 10692-2015: Steel and cast iron pipes and fittings. Acceptance, marking, packing, transportation and storage

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 1497-84: Metals. Methods of tension test

GOST 162-90: Depth gauges. Specifications

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 166-89: Vernier callipers. Specifications

GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions

GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions

GOST 2216-84: Adjustable smooth snap gauges

GOST 23118-2012: Building steel structures. General specifications

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 28548-90: Steel tubes. Terms and definitions

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests

GOST 31458-2015: Steel and cast iron pipes and fittings. Inspection documents

GOST 6507-90: Micrometers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8026-92: Levelling rules. Specifications

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 55942-2014: Steel tubes. Preparation of ends of tubes and fittings for welding. General technical requirements

GOST R ISO 10893-11-2016: Seamless and welded steel tubes. Part 11. Automated ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections

GOST R ISO 10893-2-2016: Seamless and welded steel tubes. Part 2. Automated eddy current testing for the detection of imperfections

GOST R ISO 10893-3-2016: Seamless and welded steel tubes. Part 3. Automated full peripheral flux leakage testing of ferromagnetic tubes for the detection of longitudinal and/or transverse imperfections

GOST R ISO 10893-7-2016: Seamless and welded steel tubes. Part 7. Digital radiographic testing of the weld seam for the detection of imperfections

GOST R ISO 10893-8-2014: Seamless and welded steel tubes. Part 8. Automated ultrasonic testing for the detection of imperfections

GOST R ISO 10893-9-2016: Seamless and welded steel tubes. Part 9. Automated ultrasonic testing for the detection of imperfections in strip/plate used for the manufacture of welded steel tubes

The Document is Referenced By:

GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work

PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures

SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88

SP 294.1325800.2017: The construction of steel. Design rules

SP 494.1325800.2020: Spatial metallic coatings. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!