GOST R 58097-2018
ГОСТ Р 58097-2018
|
|
Flexible reinfonced plastic pipes with thermal insulation and fittings for them for district heating and water-supply networks. General specification
Трубы гибкие полимерные армированные с тепловой изоляцией и соединительные детали к ним для наружных сетей тепло- и водоснабжения. Общие технические условия
Status: Effective - Introduced for the first time. IUS 6-2018
This standard applies to flexible reinforced polymer pipes with thermal insulation in a protective sheath and fittings for them for use in external heat and water supply networks with variable coolant temperature up to 115 ° C and maximum operating pressure up to 1.6 MPa. The standard does not apply to composite pipes of thermosets.
Настоящий стандарт распространяется на гибкие армированные полимерные трубы с тепловой изоляцией в защитной оболочке и соединительные детали к ним, предназначенные для применения в наружных сетях тепло- и водоснабжения с переменной температурой теплоносителя до 115 °С и максимальным рабочим давлением до 1,6 МПа. Стандарт не распространяется на композитные трубы из реактопластов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/5/2018
SKU: RUSS354066
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.69a Composite and textile materials and construction products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 13841-95: Corrugated board boxes for chemical products. Specifications
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 17811-78: Polyethylene bags for chemical products. Specifications
GOST 2226-2013: Bags made of paper and composite materials. General specifications
GOST 26311-84: Polyolefins. Method of determination of black content
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
GOST 32025-2012: Thermal insulation. Method for determination of steady-state transmission properties of thermal insulation for circular pipes
GOST 32415-2013: Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications
GOST ISO 1167-1-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 1. General method
GOST ISO 1167-2-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 2. Preparation of pipe test pieces
GOST ISO 161-1-2004: Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series
GOST R 53630-2015: Multilayer pressure pipes for water supply and heating systems. General specifications
GOST R 54866-2011: Thermoplastics pipes. Determination of the long-term hydrostatic strength on pipe samples by extrapolation method
GOST R 54867-2011: Multilayer plastics pipes. Determination of the long-term strength
GOST R 55134-2012: Plastics. Differential scanning calorimetry (DSC). Part 1. General principles
GOST R 55911-2013: Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe
GOST R 56730-2015: Plastic flexible pipes with thermal insulation for district heating. General specifications
GOST R 56756-2015: Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
SP 124.13330.2012: Heating networks
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
