GOST R 58115-2018
ГОСТ Р 58115-2018
|
|
Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications
Трансформаторы преобразовательные с высшим напряжением от 6 до 110 кВ для железнодорожных тяговых подстанций. Общие технические условия
Status: Effective - Introduced for the first time. IUS 7-2018
This standard applies to converter transformers with the highest voltage from 6 to 110 kV intended for operation at railway traction substations
Настоящий стандарт распространяется на преобразовательные трансформаторы с высшим напряжением от 6 до 110 кВ, предназначенные для эксплуатации на железнодорожных тяговых подстанциях
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/26/2018
SKU: RUSS354079
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.180 Transformers. Reactors »
National standards »
29 ELECTRICAL ENGINEERING »
29.180 Transformers. Reactors »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13837-79: General purpose dynamometers
GOST 14.201-83: Provision of technological efficiency of products design. General requirements
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv
GOST 16110-82: Power transformers. Terms and definitions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17216-2001: Industrial cleanliness. Grades of liquids purity
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18620-86: Electrotechnical articles
GOST 1983-2015: Voltage transformers. General specifications
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20243-74: Power transformers. Methods of short-circuit tests
GOST 21023-75: Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21242-75: Flat or pin contact terminals of electrical equipment. Main dimensions
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23706-93: Direct action analog electrical
GOST 26703-93: Analytical gas chromatographs. Specifications and testing methods
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 27.003-2016: Reliability in technology. Composition and general rules for setting reliability requirements
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 27474-87: Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
GOST 28498-90: Liquid-in-glass thermometers
GOST 28779-90: Solid electrical insulating materials. Methods of test for the determination of the flammability when exposed to an igniting source
GOST 30167-2014: Resources saving. Procedure for resource conservation indices establishment in the papers on goods
GOST 30331.1-2013: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics, definitions
GOST 30631-99: General requirements for machines, instruments and other industrial products as to environment mechanical stability
GOST 31818.11-2012: Electricity metering equipment (а.с). Particular General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST 32192-2013: Dependability in railway mechanics. General concepts. Terms and definitions
GOST 3242-79: Welded joints
GOST 32895-2014: Electrification and electric supply of the railways. Terms and definitions
GOST 33242-2015: Scales for weighing vehicles in motion and measuring the axle loads. Metrological and Technical specifications. Testing
GOST 33477-2015: System of development and launching into manufacture. Railway infrastructure equipment. Procedure of development, launching into manufacture and tolerance for use
GOST 3484.1-88: Power transformers. Electromagnetic test methods
GOST 3484.2-88: Power transformers. Heating tests
GOST 3484.3-88: Power transformers. Measuring methods of dielectric parameters of insulation
GOST 3484.5-88: Power transformers. Tank tests for leakages
GOST 3956-76: Silica gel technical. Technical conditions
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5985-79: Petroleum products. Method for determination of acidity and acid number
GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies
GOST 6356-75: Petroleum products. Method of test for flash point boy closed cup
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 6376-74: Hand anemometer accounting device. Specifications
GOST 6581-75: Liquid electrical insulating materials. Electric test methods
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7822-75: Petroleum oils. Method of dissolved water determination
GOST 8042-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 8865-93: Electrical insulation system. Thermal evalution and classification
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9105-74: The determination method of polymerisation average degree
GOST 982-80: Transformer oils
GOST IEC 61198-2014: Insulating petroleum oil. Methods for determination of 2-furfural and related compounds
GOST ISO 9612-2016: Acoustics. Noise measurement for the purpose of evaluating human exposure to noise. Method of measurements at workplaces
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.