GOST R 58154-2018
ГОСТ Р 58154-2018
|
|
Materials for substructure of hinged ventilated facade systems. General technical requirements
Материалы подконструкций навесных вентилируемых фасадных систем. Общие технические требования
Status: Effective - Introduced for the first time. IUS 8-2018
This standard applies to materials of substructures of mounted ventilated facade systems (hereinafter - NSF) of buildings and structures (hereinafter referred to as buildings) erected in all climatic regions of the Russian Federation, calculated for operation in a non-aggressive, slightly aggressive and (or) medium-aggressive environment. Do not apply to objects of individual housing construction without project documentation in accordance with Part 3 of Article 48 of the Town Planning Code of the Russian Federation). This standard establishes general requirements: - to the selection of structural materials and fasteners used in the manufacture of substructures of suspended ventilated facade systems (hereinafter - NSF) of buildings and structures (hereinafter - buildings) and when making connections between elements, as well as connecting them to others building structures; - to the choice of materials of protective coatings applied to the elements of substructures and fasteners in order to ensure the estimated service life. The requirements of this standard should be observed at the stages of the development of documentation (albums of technical solutions, standards of organizations) for new NSFs, as well as when updating the existing documentation on NSF
Настоящий стандарт распространяется на материалы подконструкций навесных вентилируемых фасадных систем (далее - НФС) зданий и сооружений (далее - зданий), возводимых во всех климатических районах Российской Федерации, рассчитываемых на эксплуатацию в неагрессивной, слабоагрессивной и (или) среднеагрессивной среде. Не распространяются на объекты индивидуального жилищного строительства без проектной документации согласно ч.3 ст.48 Градостроительного кодекса Российской Федерации). Настоящий стандарт устанавливает общие требования: - к выбору конструкционных материалов и крепежных изделий, используемых при изготовлении элементов подконструкций навесных вентилируемых фасадных систем (далее - НФС) зданий и сооружений (далее - зданий) и при устройстве соединений между элементами, а также соединений их с другими конструкциями зданий; - к выбору материалов защитных покрытий, наносимых на элементы подконструкций и крепежные изделия с целью обеспечения расчетного срока службы. Требования настоящего стандарта должны соблюдаться на стадиях разработки документации (альбомы технических решений, станда��ты организаций) на новые НФС, а также при актуализации действующей документации на НФС
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/14/2018
SKU: RUSS354125
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
The Document References:
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST ISO 10684-2015: Fasteners. Hot dip galvanized coatings
GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 55740-2013: Steel bolts, screws and studs with adhesive coating. Technical requirements
SP 131.13330.2012: Building climatology
SP 20.13330.2016: Loads and actions
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
The Document is Referenced By:
GOST R 58883-2020: Hinged facade ventilated systems. General rules for calculating substructures
GOST R 70573-2022: Cladding elements, nodes and fastening details of facade hinged ventilated structures. Durability parameters
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
