GOST R 58177-2018

ГОСТ Р 58177-2018

United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

Единая энергетическая система и изолированно работающие энергосистемы. Тепловые электрические станции. Оборудование тепломеханическое тепловых электростанций. Контроль состояния металла. Нормы и требования

Status: Effective - Introduced for the first time. IUS 1-2019

The standard applies to the main and auxiliary thermal equipment of thermal power plants, operating under excess pressure of more than 0.07 MPa or at temperatures above 115 degrees C. The standard establishes requirements aimed at ensuring safety and reliability in the operation of the following thermal mechanical equipment: with a nominal pressure of superheated steam above 4.0 MPa (screen heating surfaces and economizers, steam superheaters, manifolds, optional heat pipes, drums); - steam and hot water pipelines; - steam turbines; - gas turbines; - vessels operating under pressure; - steam boilers (energy and peak) and water boilers with pressure up to 4.0 MPa inclusive; - waste heat boilers, including as part of a CCGT.

Стандарт распространяется на основное и вспомогательное тепломеханическое оборудование тепловых электростанций, работающее под избыточным давлением свыше 0,07 МПа или при температуре свыше 115 градусов С. Стандарт устанавливает требования, направленные на обеспечение безопасности и надежности при эксплуатации следующего тепломеханического оборудования: - энергетических котлов барабанных и прямоточных с номинальным давлением перегретого пара выше 4,0 МПа (экранные поверхности нагрева и экономайзеры, пароперегреватели, коллекторы, необогреваемые трубы, барабаны); - трубопроводов пара и горячей воды; - паровых турбин; - газовых турбин; - сосудов, работающих под избыточным давлением; - котлов паровых (энергетических и пиковых) и водогрейных с давлением до 4,0 МПа включительно; - котлов-утилизаторов, в том числе в составе ПГУ.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 50

Approved: Federal Agency for Technical Regulation and Metrology, 10/19/2018

SKU: RUSS354148

Price: $644.08




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 27 Power and heat engineering »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.100 Power stations in general »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.100 Power stations in general »


The Document References:

GOST 10006-80: Metal pipes

GOST 10145-81: Metals. Stress-rupture test method

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 11150-84: Metals. Methods of tension tests at low temperatures

GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12503-75: Steel Methods of ultrasonic control. General requirements

GOST 14019-2003: Metallic materials. Bend test method

GOST 1497-84: Metals. Methods of tension test

GOST 15467-79: Product quality control. Basic concepts. Terms and definitions

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18322-2016: Maintenance and repair system of engineering. Terms and definitions

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18661-73: Steel. Method for measurement of hardness by shock indentation

GOST 19040-81: Metal tubes. Method of tension test at high temperatures

GOST 20911-89: Technical diagnostics. Terms and definitions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters

GOST 22838-77: Heat-resistant alloys. Methods of testing and estimation of macrostructures

GOST 22975-78: Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)

GOST 23764-79: Gamma-defectoscopes. General technical specifications

GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry

GOST 25866-83: Exploitation of technique. Terms and definitions

GOST 26364-90: Ferritometers for austenitic steels. General specifications

GOST 27.002-2015: Dependability in technics. Terms and definitions

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 29328-92: Stationary gas turbines for turbo generators. General technical requirements

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 3248-81: Metals. Creep test method

GOST 3728-78: Tubes. Method of bend-over test

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7122-81: Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8233-56: Steel. Microstructure standards

GOST 8693-80: Metal pipes. Method of flange testing

GOST 8694-75: Tubing (pipes). Expansion testing method

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 8817-82: Metals. Upsetting test method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9450-60: Metals. Method for testing for micro hardness by pressing a diamond pyramid

GOST 9450-76: Measurements microhardness by diamond instruments indentation

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection

GOST R 51898-2002: Safety aspects. Guidelines for their inclusion in standards

GOST R 51901.12-2007: Risk management. Procedure for failure mode and effects analysis

GOST R 52727-2007: Technical diagnostics. Acoustic-emission diagnostics. General requirements

GOST R 53700-2009: Non-destructive testing. Magnetic particle testing. Part 3: Equipment

GOST R 53966-2010: Non-destructive testing. Evaluation of mechanical stresses in constructions material. General requirements for the order of methods choice

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R EN 13018-2014: Visual testing. General principles

GOST R ISO 15549-2009: Non-destructive testing. Eddy current testing. Basic principles

GOST R ISO 16809-2015: Non-destructive testing. Ultrasonic testing. Thickness measurement

GOST R ISO 24497-2-2009: Non-destructive testing. Metal magnetic memory. Part 2. General requirements

GOST R ISO 24497-3-2009: Non-destructive testing. Metal magnetic memory method. Part 3. Inspection of welded joints

GOST R ISO 3452-1-2011: Non-destructive testing. Penetrant testing. Part 1. General principles

PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.

RD 03-85-95: Rules On the Certification of Controlled Goods for Potentially Hazardous Industrial Production, Objects and Works

SanPiN 2.6.1.1281-03: Sanitary rules on the radiation safety of personnel and the public during transportation of radioactive materials (substances)

SanPiN 2.6.1.2523-09: Norms of radiation safety

SanPiN 2.6.1.3164-14: Hygienic requirements for ensuring radiation safety during X-ray inspection

SP 2.6.1.2612-10: Basic sanitary rules for radiation safety

Federal Law 184-FZ: About technical regulation

Federal Law 412-FZ: On accreditation in the national accreditation system

Federal Law 99-FZ: On licensing certain types of activities

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants

The Document is Referenced By:

GOST R 58176-2018: Electric industry. Energy construction. Organisation of commissioning of thermal power plants. General requirements

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!