GOST R 58181-2018
ГОСТ Р 58181-2018
|
|
Gas distribution systems. Requirements to gas distribution networks. Part 7. Polyethylene gas pipelines laid inside the existing pipeline
Системы газораспределительные. Требования к сетям газораспределения. Часть 7. Полиэтиленовые газопроводы, проложенные в существующем трубопроводе
Status: Effective - Introduced for the first time. IUS 10-2018
This standard establishes requirements for the design, construction and operation of polyethylene gas pipelines laid in an existing pipeline transporting natural gas according to GOST 5542 with a pressure of not more than 1.2 MPa inclusive. This standard applies to underground gas pipelines reconstructed by the method of drawing polyethylene pipes (hereinafter referred to as PET). The provisions of this standard may be used in the design, construction and operation of polyethylene gas pipelines laid in an existing pipeline by pulling PET: - in underground pipelines for other purposes made of steel and plastic pipes; - steel underground gas pipelines laid in conditions referred to SP as special. At the same time, the requirements of this standard, documents in the field of technical regulation and standardization, imposed on an underground polyethylene gas pipeline when designing gas pipelines for gas distribution networks must be observed.
Настоящий стандарт устанавливает требования к проектированию, строительству и эксплуатации полиэтиленовых газопроводов, проложенных в существующем трубопроводе, транспортирующих природный газ по ГОСТ 5542 давлением не более 1,2 МПа включительно. Настоящий стандарт распространяется на подземные газопроводы, реконструированные методом протяжки полиэтиленовых труб (далее - ПЭТ). Положения настоящего стандарта допускается использовать при проектировании, строительстве и эксплуатации полиэтиленовых газопроводов, проложенных в существующем трубопроводе, путем протяжки ПЭТ: - в подземных трубопроводах иного назначения из стальных и полимерных труб; - стальных подземных газопроводах, проложенных в условиях, отнесенных СП 62.13330 к особым. При этом должны соблюдаться требования настоящего стандарта, документов в области технического регулирования и стандартизации, предъявляемые к полиэтиленовому подземному газопроводу при проектировании газопроводов сетей газораспределения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/24/2018
SKU: RUSS354152
The Product is Contained in the Following Classifiers:
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
GOST 12.1.004-91: Fire safety. General requirements
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST R 21.1003-2009: System of design documents for construction. Registration and storage rules design documentation
GOST R 21.1101-2013: System of design documents for construction. Main requirements for design and working documents
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 53865-2010: Gas distribution systems. Terms and definitions
GOST R 54983-2012: Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines
GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation
Order 542: Federal norms and rules in the field of industrial safety "Safety rules for gas distribution and gas consumption networks"
Order 542: On approval of standard lease agreements for forest areas
Resolution 390: Fire safety rules in the Russian Federation
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 45.13330.2017: Earthworks, grounds and footings
SP 48.13330.2011: Organization of construction
SP 62.13330.2011: Gas distribution systems
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.