GOST R 58200-2018
ГОСТ Р 58200-2018
|
|
Mining equipment. Powered face systems. General safety requirements
Оборудование горно-шахтное. Комплексы механизированные забойные. Общие требования безопасности
Status: Effective - Introduced for the first time. IUS 10-2018
This standard applies to mechanized complexes intended for use in the cleaning faces of coal mines with a dip angle of 45 ° for mining seams from 0.5 to 5.0 m. , regardless of the organizational and legal forms and forms of ownership. This standard does not apply to CMH, the production and modernization of which is mastered before the date of introduction of this standard.
Настоящий стандарт распространяется на комплексы механизированные, предназначенные для применения в очистных забоях угольных шахт с углом падения до 45° для отработки пластов мощностью от 0,5 до 5,0 м. Требования настоящего стандарта распространяются на все предприятия и организации, осуществляющие деятельность в угольных шахтах, независимо от организационно-правовых форм и форм собственности. Настоящий стандарт не распространяется на КМЗ, производство и модернизация которых освоены до срока введения настоящего стандарта
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
8/14/2018
SKU: RUSS354171
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.01 Mining equipment in general »
National standards »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.01 Mining equipment in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G41 Exploration, mining and mineral processing equipment »
The Document References:
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.029-80: Means and methods of defense from noise. Classification
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.4.002-97: Vibration protection means for hands
GOST 12.4.024-76: Specific footwear for protection from vibration
GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests
GOST 12.4.034-2017: Occupational safety standards system. Personal respiratory protection. Classification and labeling
GOST 12.4.040-78: Industrial equipment controls
GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements
GOST 12.4.275-2014: Occupational safety standards system. Personal hearing protective equipment. General technical requirements. Test methods
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 21786-76: Man-machine system. Sound signalling devices for non-voice communication. General ergonomic requirements
GOST 22269-76: Man-machine system Operator workplace layout of workplace elements General ergonomic requirements
GOST 22782.5-78: Explosion proof electrical apparatus with the type of protection «intrinsically-safe electrical circuit». Technical requirements and test methods
GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.
GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements
GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods
GOST 27039-86: Mobile flight face conveyors. General safety requirements
GOST 30852.20-2002: Mininq electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and test methods
GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31557-2012: Shearers. General technical requirements. Test methods
GOST 31561-2012: Longwall powered roof chocks. Basic parameters. General technical requirements. Test methods
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST 31610.11-2014: Explosive atmospheres. Part 1.1. The equipment with type of Ex-protection "intrinsically safe power circuit "i"
GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods
GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications
GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 53650-2009: Plough installations. General specifications
GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods
GOST R 55151-2012: Mining equipment. Cable laying machines. General technical requirements and test methods
GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods
GOST R 55157-2012: Mining equipment. Hydraulic jacks. General technical requirements and test methods
GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods
GOST R 55175-2012: Mine atmosphere. Methods of dust content control
GOST R 55729-2013: Mining equipment. Hydraulic props for roof of supports. General specifications
GOST R 55733-2013: The lighting of underground mines. Main requirements and measuring techniques
GOST R 57071-2016: Mining equipment. Regulations of safe use of machinery and mechanisms in coal mines and cut for the dust factor
GOST R 57705-2017: Mining. Safety marking for mines
Order 462: Federal norms and rules in the field of industrial safety "Instructions for combating dust in coal mines"
Order 462: On approval of the Requirements for the content of the rules for the operation of hydraulic structures (with the exception of shipping and port hydraulic structures)
Order 625: On the approval of the Veterinary Rules for the implementation of preventive, diagnostic, restrictive and other measures, the establishment and cancellation of quarantine and other restrictions aimed at preventing the spread and elimination of foci of porcine reproductive and respiratory syndrome (PRRS)
Order 625: Federal norms and rules in the field of industrial safety "Instructions for the construction, inspection and measurement of the resistance of mine grounding"
Order 627: Federal norms and rules in the field of industrial safety "Instructions for power supply, selection and testing of electrical devices, cables and relay protection devices in local networks of coal mines with voltage up to 1200 V"
RD 05-124-96: Safety requirements for sewage treatment plants designed for the treatment of 1.5–5.0 m seams with a dip angle of 24–45 degrees.
RD 05-447-02: Regulations on the procedure for changing the designs of individual pieces of equipment used in coal and slate mines
RD 06-572-03: Instructions for the safe operation of electrical installations in the mining industry
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SanPiN 2.2.2948-11: Hygienic requirements to organizations engaged in the extraction and processing of coal (oil shale), and to work organization
Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
