GOST R 58216-2018
ГОСТ Р 58216-2018
|
|
Oil and gas industry. Arctic operations. Marine Corrosion Protection
Нефтяная и газовая промышленность. Арктические операции. Защита от коррозии морских сооружений
Status: Effective - Introduced for the first time. IUS 1-2019
The standard establishes general requirements for corrosion protection at all stages of the life cycle of steel structures and pipelines of offshore stationary structures of oil and gas production complexes and port facilities that are operated at temperatures from 0 ° C to minus 60 ° C and are under the ice influence of the underwater and surface part of them. The provisions of this standard are used in the design, construction, installation, reconstruction, operation and maintenance of systems for the protection against corrosion of offshore structures operating in arctic conditions.
Стандарт устанавливает общие требования к защите от коррозии на всех этапах жизненного цикла стальных конструкций и трубопроводов морских стационарных сооружений нефтегазодобывающих комплексов и портовых сооружений, которые эксплуатируются при температурах от 0 °С до минус 60 °С и находятся под ледовым воздействием подводной и надводной их части. Положения настоящего стандарта применяют при проектировании, строительстве, монтаже, реконструкции, эксплуатации и ремонте систем защиты от коррозии морских сооружений, эксплуатирующихся в арктических условиях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/15/2018
SKU: RUSS354187
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.3 For oil industry »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.2 For gas industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
The Document References:
Federal Law 174-FZ: Ecological Conformity Assessment
GOST 10692-2015: Steel and cast iron pipes and fittings. Acceptance, marking, packing, transportation and storage
GOST 14192-96: Cargo marking
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 27037-86: Paint materials. Method of determination of stability to temperature changes
GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method
GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 3345-76: Cables and insulated conductors. Method for the determination of the electric resistance of insulation
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5272-68: Corrosion of Metals. Terms
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 9.008-82: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Terms and definitions
GOST 9.072-2017: Unified system of protection against corrosion and aging. Paint coatings. Terms and Definitions
GOST 9.103-78: Unified system of corrosion and ageing protection. Temporary prevention of metal and products. Terms and definitions
GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control
GOST 9.315-91: Unified system of corrosion and ageing protection. Hot-dip aluminium coatings. General requirement and methods of checking
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9.409-88: Unified system of corrosion and ageing protection. Paint coatings. Methods of accelerated tests for the resistance to the effect of petroleum products
GOST R 50571.3-2009: Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
The Document is Referenced By:
GOST R 58215-2018: Oil and gas industry. Arctic operations. Work environment
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.