GOST R 58283-2018
ГОСТ Р 58283-2018
|
|
Oil and gas industry. Arctic operations. Accounting for ice loads in the design of offshore platforms
Нефтяная и газовая промышленность. Арктические операции. Учет ледовых нагрузок при проектировании морских платформ
Status: Effective - Introduced for the first time. IUS 1-2019
The standard applies to offshore platforms designed for operation on offshore oil and gas fields in ice conditions, in terms of accounting for ice loads during their design, and does not apply to mobile drilling rigs.
Стандарт распространяется на морские платформы, предназначенные для эксплуатации на морских нефтегазопромыслах в ледовых условиях, в части учета ледовых нагрузок при их проектировании, и не распространяется на мобильные буровые установки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/15/2018
SKU: RUSS354248
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
The Document References:
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST ISO 11453-2005: Statistical methods. Statistical interpretation of data. Tests and confidence intervals relating to proportions
GOST R 50779.0-95: Statistical methods. General provisions
GOST R 50779.100-2017: Statistical methods. «Six Sigma» methodology. General criteria of benchmarking in organization
GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions
GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions
GOST R 50779.21-2004: Statistical methods. Determination rules and methods for calculation of statistical characteristics based on sample data. Part 1. Normal distribution
GOST R 50779.22-2005: Statistical interpretation of test results. Estimation of the mean. Confidence interval
GOST R 50779.23-2005: Statistical methods. Statistical interpretation of data. Comparison of two means in the case of paired observations
GOST R 50779.24-2005: Interpretation of statistical data. Estimation of a median
GOST R 50779.25-2005: Statistical methods. Statistical interpretation of data. Power of tests relating to means and variances
GOST R 50779.26-2007: Statistical methods. Point estimates, confidence intervals, prediction intervals and tolerance intervals for exponential distribution
GOST R 50779.27-2017: Statistical methods. Weibuii distribution. Data analysis
GOST R 50779.28-2017: Statistical methods. Power law model. Goodness of-fit tests and estimation methods
GOST R 50779.29-2017: Statistical methods. Statistical interpretation of data. Determination of statistical tolerance intervals
GOST R 50779.30-95: Statistical methods. Acceptance sampling. General requirements
GOST R 50779.41-96: Statistical methods. Control charts for arithmetic average with warning limits
GOST R 50779.46-2012: Statistical methods. Process management. Part 4. Process capability and performance estimation
GOST R 50779.50-95: Statistical methods. Acceptance sampling by variables. General requirements
GOST R 50779.51-95: Statistical methods. Continuous acceptance sampling by attributes
GOST R 50779.52-95: Statistical methods. Acceptance sampling by attributes
GOST R 50779.53-98: Statistical methods. Acceptance sampling by variables for normal distribution. Part 1. Known standard deviation
GOST R 50779.60-2017: Statistical methods. Use in proficiency testing by interlaboratory comparison
GOST R 50779.70-2018: Statistical methods. Sampling procedures for inspection by attributes. Introduction to GOST R ISO 2859 series of standards
GOST R 50779.72-99: Statistical methods. Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
GOST R 50779.75-2018: Statistical methods. Sequential sampling plans for inspection by attributes
GOST R 50779.76-2018: Statistical methods. Sampling procedures for inspection by variables. Sequential sampling plans for percent nonconforming (known standard deviation)
GOST R 50779.77-99: Statistical methods. Acceptance sampling plans and procedures for the inspection of bulk materials
GOST R 50779.80-2013: Statistical methods. Attribute agreement analysis
GOST R 50779.81-2018: Statistical methods. Double sampling plans by attributes with minimal sample sizes indexed by PRQ and CRQ values
GOST R 50779.82-2018: Statistical methods. Combined accept-zero systems and process control procedures for product acceptance
GOST R 50779.83-2018: Statistical methods. Acceptance sampling procedures by attributes. System zero acceptance on the basis of the quality reserve principle
GOST R 50779.84-2018: Statistical methods. Uncertainty evaluation of results of two-factor crossed design
GOST R 50779.90-2014: Statistical methods. Requirements to information about software, used in development of normative documents
GOST R 54483-2011: Oil and gas industry. Offshore platforms for oil and gas production. General requirements
GOST R 55311-2012: Petroleum and natural gas industries. Offshore oil and gas field structures. Terms and definitions
GOST R 57148-2016: Petroleum and natural gas industry. Offshore oil and gas field structures. Design and operation under metocean conditions
GOST R 58112-2018: Petroleum and natural gas industries. Arctic operations. Ice management. Physical environmental data collection
ND 2-020201-013: Rules for the classification, construction and equipment of floating drilling rigs and offshore fixed platforms
SP 11-114-2004: Engineering surveys on the continental shelf for the construction offshore oil and gas installations
SP 20.13330.2016: Loads and actions
SP 33-101-2003: Determination of design hydrological performance
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 47.13330.2016: Engineering survey for construction. Basic principles
|
Customers Who Viewed This Item Also Viewed:
 |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
