GOST R 58284-2018
ГОСТ Р 58284-2018
|
|
Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
Нефтяная и газовая промышленность. Морские промысловые объекты и трубопроводы. Общие требования к защите от коррозии
Status: Effective - Introduced for the first time. IUS 2-2019
The standard establishes general requirements for the protection against corrosion of steel and reinforced concrete offshore oil and gas facilities, trunk, process and collectors of precast pipelines, stationary platforms, casing of wells and subsea production complexes. The standard defines general requirements for the provision of anticorrosive protection of offshore oil and gas field facilities and pipelines during the design, construction and operation phases, including requirements for corrosion monitoring of facilities. The standard does not apply to objects supervised by the Russian Maritime Register of Shipping. The provisions of this standard do not apply to means of anti-corrosion protection of the surface of the zones of variable wetting of freezing waters.
Стандарт устанавливает общие требования к защите от коррозии стальных и железобетонных морских нефте- и газодобывающих сооружений, магистральных, технологических и коллекторов сборных трубопроводов, стационарных платформ, обсадных колонн скважин и подводно-добычных комплексов. Стандарт определяет общие требования к обеспечению противокоррозионной защиты морских нефтегазовых промысловых объектов и трубопроводов на этапах проектирования, строительства и эксплуатации, в том числе требования к коррозионному мониторингу объектов. Стандарт не распространяются на объекты, поднадзорные Российскому морскому регистру судоходства. Положения настоящего стандарта не распространяются на средства противокоррозионной защиты поверхности зон переменного смачивания замерзающих акваторий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/21/2018
SKU: RUSS354249
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
47 Shipbuilding and marine structures »
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.3 For oil industry »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.2 For gas industry »
ISO classifier »
47 SHIPBUILDING AND MARINE STRUCTURES »
47.020 Shipbuilding and marine structures in general »
National standards »
47 SHIPBUILDING AND MARINE STRUCTURES »
47.020 Shipbuilding and marine structures in general »
ISO classifier »
47 SHIPBUILDING AND MARINE STRUCTURES »
47.020 Shipbuilding and marine structures in general »
47.020.01 Shipbuilding and offshore structures, general aspects »
National standards »
47 SHIPBUILDING AND MARINE STRUCTURES »
47.020 Shipbuilding and marine structures in general »
47.020.01 Shipbuilding and offshore structures, general aspects »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
The Document References:
GOST 11262-2017: Plastics. Tensile test method
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14760-69: Adhesives. Method of determination of tensile strength
GOST 1508-78: Control rubber and plastic-insulated cables. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16442-80: Plastics insulated power cables. Specifications
GOST 17792-72: Standard reference silver-silver chloride saturate electrode of second class
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 25271-93: Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield method
GOST 26251-84: Galvanium anodes for corrosion protection. Specifications
GOST 27037-86: Paint materials. Method of determination of stability to temperature changes
GOST 27271-2014: Paint and varnish materials. The method of determining the viability of multi-component systems
GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 31939-2012: Paint materials. Determination of non-volatile-matter mass fraction
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 3345-76: Cables and insulated conductors. Method for the determination of the electric resistance of insulation
GOST 4650-2014: Plastics. Methods for the determination of water absorption
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.039-74: Unified system of corrosion and ageing protection. Corrosive aggressiveness of atmosphere
GOST 9.104-2018: Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9.409-88: Unified system of corrosion and ageing protection. Paint coatings. Methods of accelerated tests for the resistance to the effect of petroleum products
GOST 9.502-82: Unified system of corrosion and ageing protection. Inhibitors of metals corrosion for aqueous systems. Methods of corrosion tests
GOST 9.506-87: Unified system of corrosion and ageing protection. Corrosion inhibitors of metals in water-petroleum environments. Methods of protective ability evaluation
GOST 9.514-99: Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method protective ability evaluation
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 977-88: Steel castings. General specifications
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 54382-2011: Oil and gas industry. Submarine pipeline systems. General requirements
GOST R 55311-2012: Petroleum and natural gas industries. Offshore oil and gas field structures. Terms and definitions
GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
The Document is Referenced By:
GOST R 58216-2018: Oil and gas industry. Arctic operations. Marine Corrosion Protection
PNST 613-2022: Oil and gas industry. Underwater production systems. Electrical systems. General provisions
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
PNST 690-2022: Oil and gas industry. Underwater production systems. Design of electrochemical protection. Methodical instructions.
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.