imgalt

GOST R 58323-2018

ГОСТ Р 58323-2018

Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

Трубы железобетонные для бестраншейной прокладки инженерных сетей. Технические условия

Status: Effective - Introduced for the first time. IUS 3-2019

The standard applies to reinforced concrete pipes of annular cross-section with a cylindrical outer surface intended for installation by the method of trenchless laying (microtunneling, forcing) of underground sewage pipelines (collectors) transporting gravity domestic and industrial fluids, atmospheric, waste and groundwater, including in the presence of aggressive environmental influences. With the technical justification of the pipe is allowed to use in pipelines laid under buildings and structures for various purposes, including under roads and railways, water barriers, as well as for the device of underground technological tunnels and channels, including those located below ground waters Pipes are also allowed to be used as rigid and hermetic protective covers (cases) of collectors for laying telephone, fiber-optic and power cables, closed pipelines of heating mains, pressure water and sewer networks, oil and gas pipelines, and other product pipelines.

Стандарт распространяется на железобетонные трубы кольцевого поперечного сечения с цилиндрической наружной поверхностью, предназначенные для устройства методом бестраншейной прокладки (микротоннелирования, продавливания) подземных канализационных трубопроводов (коллекторов), транспортирующих самотеком бытовые и производственные жидкости, атмосферные, сточные и подземные воды, в т. ч. при наличии агрессивного воздействия среды. При техническом обосновании трубы допускается применять в трубопроводах, прокладываемых под зданиями и сооружениями различного назначения, в т. ч. под автомобильными и железными дорогами, водными преградами, а также для устройства подземных технологических тоннелей и каналов, в т. ч. расположенных ниже уровня грунтовых вод. Трубы также допускается применять в качестве жестких и герметичных защитных кожухов (футляров) коллекторов для прокладки телефонных, оптико-волоконных и силовых кабелей, закрытых трубопроводов теплотрасс, напорных водопроводных и канализационных сетей, нефте- и газопроводов, а также других продуктопроводов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/18/2018

SKU: RUSS354285

Price: $478.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


The Document References:

GN 2.1.6.3492-17: Maximum permissible concentrations (MPC) of pollutants in the atmospheric air of urban and rural settlements

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10632-2014: Wood particle boards. Specifications

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12020-2018: Plastics. Testing methods of plastics resistance to chemical substances

GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 19281-2014: High strength rolled steel. General specification

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 23009-2016: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 31108-2016: General structural Portland clinker cements. Specifications

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications

GOST 8736-2014: Sand for construction works. Specifications

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications

GOST R 55224-2012: Cements for the transport construction. Specifications

GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

PR 50.2.104-09: State system for ensuring uniformity of measurements. Procedure for testing standard samples or measuring instruments for type approval

SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate

SanPiN 2.6.1.2523-09: Norms of radiation safety

SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones

SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures

SP 131.13330.2018: Construction Climatology

SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument

SP 28.13330.2017: Protection against corrosion of construction

SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 60.13330.2016: Heating, ventilation and air conditioning

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

The Document is Referenced By:

GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!