SP 362.1325800.2017
СП 362.1325800.2017
|
|
Fencing structures made of sandwich panels. Design rules
Ограждающие конструкции из трехслойных панелей. Правила проектирования
Status: Effective - Introduced for the first time
The set of rules applies to the design and calculation of enclosing structures for roofs, exterior walls, as well as suspended ceilings and internal partitions using three-layer sandwich panels with weakly profiled or corrugated cladding from cold-rolled steel sheet from 0.5 to 2.0 mm thick, protected by a zinc or alyumotsinkovy covering and a core no more than 300 mm thick.
Свод правил распространяется на проектирование и расчет ограждающих конструкций крыш, наружных стен, а также подвесных потолков и внутренних перегородок с применением трехслойных панелей типа "сэндвич" со слабопрофилированными или гофрированными обшивками из стального холоднокатаного тонкого листа толщиной от 0,5 до 2,0 мм, защищенного цинковым или алюмоцинковым покрытием и сердцевиной толщиной не более 300 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
11/14/2017
SKU: RUSS354839
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.10 Walls. Partitions. Facades »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications
GOST 23486-79: Wall metal-faced sandwich panels with polyurethane foam thermal insulation. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 30403-2012: Building structures. Fire hazard test method
GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R ISO 12491-2011: Building materials and components. Statistical methods for quality control
SP 112.13330.2011: Fire safety of buildings and works
SP 12.13130.2009: Determination of categories of rooms, buildings and external installations for explosion and fire hazards
SP 16.13330.2017: Steel structures
SP 20.13330.2016: Loads and actions
SP 28.13330.2017: Protection against corrosion of construction
The Document is Referenced By:
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 99/pr: On the approval of the Plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes of practice for 2021.
SP 109.13330.2012: Cold storage units
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
