SP 375.1325800.2017
СП 375.1325800.2017
|
|
Industrial chimneys. Design rules
Трубы промышленные домовые. Правила проектирования
Status: Effective - Introduced for the first time
This set of rules establishes requirements for the design of industrial chimneys, including foundations, with bearing trunks of brick, reinforced concrete, steel, polymer composites, as well as industrial chimneys supported by supporting metal towers (frames). This set of rules does not apply to the design of industrial chimneys with a height from the installation mark of 15 m or less. This set of rules does not apply to the design of foundations of industrial chimneys, intended for construction in special conditions: on permafrost, subsiding, bulk and alluvial soils, undermining and karst areas
Настоящий свод правил устанавливает требования к проектированию промышленных дымовых труб, включая фундаменты, с несущими стволами из кирпича, железобетона, стали, полимерных композитов, а также на промышленные дымовые трубы, поддерживаемые несущими металлическими башнями (каркасами). Настоящий свод правил не распространяется на проектирование промышленных дымовых труб высотой от отметки установки 15 м и менее. Настоящий свод правил не распространяется на проектирование фундаментов промышленных дымовых труб, предназначенных для строительства в особых условиях: на вечномерзлых, просадочных, насыпных и намывных грунтах, подрабатываемых и закарстованных территориях
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/14/2017
SKU: RUSS354852
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
The Document is Replaced With:
SP 375.1325800.2023: Industrial flue pipes. Design rules
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12071-2014: Soils. Sampling, packing, transportation and keeping of samples
GOST 19281-2014: High strength rolled steel. General specification
GOST 19912-2012: Soils. Field test methods: cone penetration test and dynamic probing
GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics
GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications
GOST 530-2012: Ceramic brick and stone. General specifications
Order 119: The procedure for carrying out weight and dimensional control of vehicles, including the procedure for organizing points of weight and dimensional control of vehicles
Order 119: Federal Aviation Rules "Placement of markings and devices on buildings, structures, communication lines, power lines, radio equipment and other objects installed to ensure the safety of aircraft flights"
SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2017: Steel structures
SP 20.13330.2016: Loads and actions
SP 22.13330.2016: Soil bases of buildings and structures
SP 24.13330.2011: Pile foundations
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 43.13330.2012: Structures for industrial installations
SP 47.13330.2016: Engineering survey for construction. Basic principles
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
VSN 286-90: Guidelines for the calculation of reinforced concrete chimneys
The Document is Referenced By:
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
SP 375.1325800.2023: Industrial flue pipes. Design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.