imgalt

SP 384.1325800.2018

СП 384.1325800.2018

Tent structures. Design rules

Конструкции строительные тентовые. Правила проектирования

Status: Effective - Introduced for the first time

The set of rules applies to the design of new, reconstruction and overhaul of building awning structures for various purposes in all climatic zones of the Russian Federation. The requirements of the set of rules apply to awning structures with pre-stressed soft shells of negative curvature and do not apply to awning structures with flat shells. The requirements of the set of rules are aimed at improving the level of safety and comfort of finding different groups of the population in buildings and structures for various purposes using construction tent structures (CST), the use of common methods for determining operational performance.

Свод правил распространяется на проектирование новых, реконструкцию и капитальный ремонт строительных тентовых конструкций различного назначения во всех климатических зонах Российской Федерации. Требования свода правил распространяются на тентовые конструкции с предварительно напряженными мягкими оболочками отрицательной кривизны и не распространяются на тентовые конструкции с плоскими оболочками. Требования свода правил направлены на повышение уровня безопасности и комфортности нахождения различных групп населения в зданиях и сооружениях различного назначения с использованием конструкций строительных тентовых (КСТ), применение единых методов определения эксплуатационных характеристик.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 8/13/2018

SKU: RUSS354861

Price: $566.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction �� 2. General technical regulatory documents » k.20 Basic provisions for reliability of building structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.040 Construction » 91.040.30 Residential buildings »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.99 Other building structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.99 Other building structures »


The Document References:

Federal Law 162-FZ: About standardization in the Russian Federation

Federal Law 184-FZ: About technical regulation

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

GOST 12.1.044-2018: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 14236-81: Polymer films. Tensile strength test method

GOST 17073-71: Artificial leather. Methods for the determination of thickness and mass of 1 sq m

GOST 18956-73: Rolling roof materials. Aging under artificial climatic factors. Test methods

GOST 26302-93: Glass. Methods of determination of light regular transmittance and light regular reflection

GOST 27296-2012: Buildings and constructions. Methods for measurement of sound insulation of protecting designs

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 29151-91: RVC-coated tarpaulins for automobile transport. General specifications

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30303-95: Fabrics coated with rubber or plastics. Determination of breaking strength and elongation at break

GOST 30304-95: Fabrics coated with rubber or plastics. Determination of tear resistance

GOST 30402-96: Building materials Ignitability Test Meth

GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance

GOST EN 13897-2012: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness after stretching at low temperature

GOST EN 410-2014: Glass and glass items. Methods for determining the optical characteristics. Determination of light and solar characteristics

GOST R 51032-97: Building materials spread flame test method

GOST R ISO 2411-2014: Textiles. Rubber-or plastics-coated fabrics. Method for determination of coating adhesion

RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures

Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services

Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content

SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications

SP 112.13330.2011: Fire safety of buildings and works

SP 128.13330.2016: Aluminium structures

SP 16.13330.2017: Steel structures

SP 17.13330.2017: The roofs

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 20.13330.2016: Loads and actions

SP 22.13330.2016: Soil bases of buildings and structures

SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions

SP 28.13330.2017: Protection against corrosion of construction

SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules

SP 4.13130.2013: Systems of fire protection. Restriction of fire spread at object of defense. Requirements to special layout and structural decisions

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 51.13330.2011: Noise protection and rooms acoustics.

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 64.13330.2017: Timber structures

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!