SP 124.13330.2011
СП 124.13330.2011
|
|
Thermal networks
Тепловые сети
These rules and regulations apply to heating networks (with all associated structures) from the output gate valves (excluding them) of the heat source collectors or from the external walls of the heat source to the exit gate valves (including them) of the heating points (input nodes) of buildings and structures transporting hot water with a temperature of up to 200 ° C and a pressure of up to 2.5 MPa inclusive, water vapor with a temperature of up to 440 ° C and a pressure of up to 6.3 MPa inclusive, condensate of water vapor. The structure of heating networks includes buildings and structures of heating networks: pumping, heating stations, pavilions, chambers, drainage devices, etc. These standards deal with district heating systems (hereinafter referred to as the DHW) in terms of their interaction in a single technological process of production, distribution, transportation and consumption of heat. These standards and rules should be observed when designing new and reconstructing, modernizing and re-equipping existing heating networks (including facilities on heating networks)
Настоящие нормы и правила распространяются на тепловые сети (со всеми сопутствующими конструкциями) от выходных запорных задвижек (исключая их) коллекторов источника теплоты или от наружных стен источника теплоты до выходных запорных задвижек (включая их) тепловых пунктов (узлов вводов) зданий и сооружений, транспортирующие горячую воду с температурой до 200 °С и давлением до 2,5 МПа включительно, водяной пар с температурой до 440 °С и давлением до 6,3 МПа включительно, конденсат водяного пара. В состав тепловых сетей включены здания и сооружения тепловых сетей: насосные, тепловые пункты, павильоны, камеры, дренажные устройства и т.п. В настоящих нормах рассматриваются системы централизованного теплоснабжения (далее - СЦТ) в части их взаимодействия в едином технологическом процессе производства, распределения, транспортирования и потребления теплоты. Настоящие нормы и правила следует соблюдать при проектировании новых и реконструкции, модернизации и техническом перевооружении существующих тепловых сетей (включая сооружения на тепловых сетях)
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS366427
The Product is Contained in the Following Classifiers:
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document is Replaced With:
SP 124.13330.2012: Heating networks
The Document References:
NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 10-400-01: Standards for Strength Analysis of Piping of Piped Heat Distribution Systems
RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.04.01-85: Domestic water supply and plumbing system
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.