ST TsKBA 083-2016
СТ ЦКБА 083-2016
|
|
Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications
Арматура трубопроводная. Сильфоны многослойные из сплава ВТ1-0. Общие технические условия
Status: Valid - Supersedes
The standard applies to multilayer bellows made of VT1-0 titanium alloy, designed to work as media separators, sealing elements, elastic elements, as well as elements of the power unit (drive) in environments that do not cause corrosion of the material, at temperatures from minus 50 degrees Celsius to plus 200 degrees Celsius
Стандарт распространяется на многослойные сильфоны из титанового сплава ВТ1-0, предназначенные для работы в качестве разделителей сред, элементов уплотнения, упругих элементов, а также элементов силового узла (привода) в средах, не вызывающих коррозии материала, при температуре от минус 50 градусов Цельсия до плюс 200 градусов Цельсия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: JSC NPF TsKBA,
8/22/2016
SKU: RUSS371274
The Product is Contained in the Following Classifiers:
Organization Standards »
Standards NPF TsKBA »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.3 Bellows »
As a Replacement Of:
OST 26-07-2019-81: Bellows from alloy VТ1-0. Specifications.
ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions
The Document References:
GOST 10733-98: Mechanical hand and pocket watches. General specifications
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 1861-73: Compressor oils
GOST 1908-88: Capacitor paper
GOST 19212-87: Difluorodichloromethane (khladon 12). Specifications
GOST 1942-86: 1,2-Dichlorethane for industrial use. Specifications
GOST 19807-91: Wrought titanium and titanium alloys. Grades
GOST 2.124-2014: Unified system for design documentation. Procedure for use of over-the-counter goods.
GOST 2.124-85: Sequence of application of purchased products
GOST 21557-83: The bushings and rings for metallic bellows. General specifications
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22743-85: Siphons. Terms, definitions and letter symbols
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24297-87: Input inspection of products. General provisions.
GOST 25346-2013: Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 28498-90: Liquid-in-glass thermometers
GOST 29329-92: Balance for static weightings
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3022-80: Technical hydrogen. Specification
GOST 515-77: Bitumized and tarred packaging paper
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6221-90: Industrial liquid ammonia
GOST 8050-85: Carbon dioxide,
GOST 8273-75: Packing paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 9243-75: KS-19 compressor oil
GOST 9285-78: Potassium hydroxide technical. Specifications
GOST 9-92: Technical-grade Aqueous ammonia
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications
OST 26-07-2019-81: Bellows from alloy VТ1-0. Specifications.
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 039-2010: Pipe fittings. Periodic testing of bellows. General requirements
ST TsKBA 041-2008: Pipe fittings. Input control of materials, semi-finished products and components
ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions
The Document is Referenced By:
ST TsKBA 039-2010: Pipe fittings. Periodic testing of bellows. General requirements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.