Safety Guide for the Use of Atomic Energy
Руководство по безопасности при использовании атомной энергии
Status: Effective
The safety manual contains recommendations of the Federal Service for Ecological, Technological and Nuclear Supervision on the establishment and methods of monitoring the resource characteristics of the electrical equipment of nuclear plants during their design, construction, manufacture, operation and decommissioning. The Safety Guide applies to the electrical equipment of nuclear power plants included in the resource management program in accordance with the requirements of NP-096-15. Safety guidance is recommended for use by legal and physical (officials) persons involved in the design, construction, manufacture, operation and decommissioning of electrical equipment of nuclear power plants
Руководство по безопасности содержит рекомендации Федеральной службы по экологическому, технологическому и атомному надзору по установлению и методам мониторинга ресурсных характеристик электротехнического оборудования атомных станций при их проектировании, конструировании, изготовлении, эксплуатации и выводе из эксплуатации. Действие Руководства по безопасности распространяется на электротехническое оборудование атомных станций, включенное в программу управления ресурсом в соответствии с требованиями НП-096-15. Руководство по безопасности рекомендуется для применения юридическими и физическими (должностными) лицами, осуществляющими проектирование, конструирование, изготовление, эксплуатацию и вывод из эксплуатации электротехнического оборудования атомных станций.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Service for Ecological, Technological and Nuclear Supervision,
10/13/2017
SKU: RUSS371879
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision »
2. Nuclear power plants »
Safety Guides »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
Other documents »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.99 Nuclear energy, other aspects »
The Document References:
Federal Law 170-FZ: On technical inspection of vehicles and on amendments to certain legislative acts of the Russian Federation
GOST 10169-77: 3-phase synchronous machines. Test methods
GOST 11262-80: Plastics. Tensile strength test method.
GOST 13268-88: Tubular electric heaters
GOST 15845-80: Cables products. Terms and definitions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16962.2-90: Electrotechnical product
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 18311-80: Electrical products. Terms and definitions of basic concepts
GOST 19108-81: Tubular heating elements (THE) for household electric appliances. General specifications
GOST 19109-84: Plastics. Method for the determination of Izod impact strength.
GOST 20074-83: Electrical equipment and installations. Method measurements of partial discharge characteristics
GOST 20911-89: Technical diagnostics. Terms and definitions
GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST 24291-90: A set of electrical devices and equipment for power station and network. Terms and definitions
GOST 24621-91: Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 24622-91: Plastics. Determination of hardness. Rockwell hardness
GOST 25866-83: Exploitation of technique. Terms and definitions
GOST 25922-83: Electrical insulating materials. Determination of stiffness. Methods of test
GOST 26881-86: Stationary leaden batteries
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 27905.1-88: Electrical insulation systems of electrical equipment. Evaluation and classification
GOST 27905.2-88: Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST 27905.3-88: Electrical insulation systems. Methods of multi-factor functional tests
GOST 27905.4-88: Electrical insulation systems. Methods of evaluation of electrical endurance
GOST 30372-95: Electromagnetic compatibility of electronic equipment. Terms and definitions
GOST 32106-2013: Condition monitoring and diagnostics of machines. Hazardous equipment monitoring. Vibration generated by rotodynamic pump and compressor units
GOST 3484.1-88: Power transformers. Electromagnetic test methods
GOST 3484.3-88: Power transformers. Measuring methods of dielectric parameters of insulation
GOST 4651-2014: Plastics. Compression test method
GOST 4651-82: Plastics. Compression test method
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage
GOST 6433.4-71: Solid electrical insulating materials. Methods for evaluation of dielectric power factor and permittivity at power (50 Hz) frequency
GOST 667-73: Battery sulphuric acid. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 9.311-87: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Method of corrosion damage evaluation
GOST 9.707-81: Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
GOST 981-75: Mineral oils. Method for determination of oxidation stability
GOST IEC 60034-14-2014: Rotating electrical machines. Part 14. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity
GOST IEC 60947-5-4-2014: Low-voltage switchgear and control gear. Part 5-4. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
GOST ISO 10816-1-97: Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines
GOST ISO 7919-1-2002: Vibration. Evaluation of machine vibration by measurements on rotating shafts. General guidelines
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51372-99: Accelerated life and storable life tests methods in special aggressive and other special medias for technical products, material and systems of materials. General
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
GOST R 53394-2009: Integrated Logistic Support. Basic terms and definitions
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R IEC 60034-14-2008: Electric rotating machines. Part 14. Mechanical vibration of certain types of machines with a rotation axis height of 56 mm or more. Measurements, assessment and limits of vibration
GOST R IEC 60896-11-2015: Stationary lead-acid batteries. Part 11. Vented types. General requirements and methods of tests
GOST R IEC 60896-21-2013: Stationary lead-acid batteries. Part 21. Valve regulated types. Methods of test
GOST R IEC 60896-22-2015: Stationary lead-acid batteries. Part 22. Valve regulated types. Requirements
GOST R ISO 17359-2015: Condition monitoring and diagnostics of machines. General guidelines
RD 34.45-51.300-97: Electrical equipment testing scope and standards.
The Document is Referenced By:
GOST R 58341.1-2019: Element of a nuclear power plant block. Resource Management Procedure
GOST R 58341.2-2019: Diesel generator sets of nuclear power plants. Accounting for actually depleted resource and estimation of residual resource
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
