GOST R 12.4.299-2017
ГОСТ Р 12.4.299-2017
|
|
Occupational safety standards system. Minerґs overalls for mechanical action protection and general industrial contamination protection. General technical requirements
Система стандартов безопасности труда. Костюмы шахтерские для защиты от механических воздействий и общих производственных загрязнений. Общие технические требования
Status: Effective - Introduced for the first time. IUS 3-2018
This standard applies to miner suits designed to be used as special clothing (hereinafter - work clothing) to protect against general industrial pollution and mechanical stress in the mining, including coal, industry. The standard establishes general technical requirements for workwear and materials for its manufacture. This standard is used in the design of workwear, in the setting of products for production and confirmation of compliance. This standard does not apply to overalls for units that ensure the elimination of consequences of technological and natural disasters
Стандарт распространяется на шахтерские костюмы, предназначенные для эксплуатации в качестве специальной одежды (далее - спецодежда) для защиты от общих производственных загрязнений и механических воздействий в горнодобывающей, в том числе угольной, промышленности. Стандарт устанавливает общие технические требования к спецодежде и материалам для ее изготовления. Стандарт применяют при проектировании спецодежды, при постановке продукции на производство и подтверждении соответствия. Стандарт не распространяется на спецодежду для подразделений, обеспечивающих ликвидацию последствий чрезвычайных ситуаций техногенного и природного характера.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/26/2017
SKU: RUSS372247
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.3 Special protective clothing »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.10 Protective clothing »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.10 Protective clothing »
The Document References:
Decision 299: Uniform sanitary and epidemiological and hygienic requirements for products (goods) subject to sanitary and epidemiological supervision (control)
GOST 10581-91: Ready-made sewing. Marking, packing, transportation and storage
GOST 11209-2014: Fabrics for protective clothing. Technical general requirements. Methods for testing
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.031-84: Personal safety means. Determination of sort
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12.4.141-99: Occupational safety standards system. Hand protection means, industrial clothing and materials for their manufacture. Methods for determination of cut resistance
GOST 12.4.142-84: Fabrics for protective coveralls
GOST 12.4.241-2013: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture
GOST 12.4.280-2014: Occupational safety standards system. Special clothing for mechanical action protection and general industrial contamination protection. General technical requirements
GOST 12.4.281-2014: Occupational safety standards system. High-visibility warning clothing. Technical requirements
GOST 12.4.303-2016: Occupational safety standards system. Protective clothing for low temperatures. Technical requirements
GOST 12088-77: Textiles and articles. Method for the determination of air permeability
GOST 12807-2003: Sewing goods. Classification of stitches, stitching and seems
GOST 15967-70: Linen and semi-linen fabrics for overalls. Method for determination of surface abrasion resistance
GOST 17037-85: Tailored and knitted goods. Terms and definitions
GOST 17317-88: Artificial leather. Method for determination of interlayer bonding strength
GOST 17804-72: Safety standards system. Industrial clothing. Method for determination of dust-proofing of clothes and seams
GOST 19616-74: Weaving and knitted fabrics. A method for evaluating the specific surface resistance
GOST 2.114-2016: Unified system for design documentation. Specifications
GOST 20566-75: Textile fabrics and piece-goods. Acceptance rules and sampling method
GOST 22977-89: Components of tailored goods. Terms and definitions
GOST 23948-80: Sewing wares. Acceptation rules
GOST 25617-2014: Linen, semilinen, cotton and mixed fabrics and pice-goods. Methods of chemical tests
GOST 28073-89: Sewing articles. Methods for the determination of breaking load, elongation of thread seams, slippage of fibre trends in seams
GOST 29122-91: Means of individual protection х
GOST 30292-96: Textiles. Method of spray test
GOST 31396-2009: Classification of standard women's figurеs by heights, sizes and full-bodied groups for projection of clothes
GOST 31399-2009: Classification of standard men's figurеs by heights, sizes and full-bodied groups for projection of clothes
GOST 3811-72: Textile materials. Textile fabrics, nonwoven fabrics and piece-articles. Methods for determination of linear dimensions linear and surface density
GOST 3813-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of brearing under tension
GOST 4103-82: Ready-made sewing goods. Methods of quality control
GOST EN 340-2012: Occupational safety standards system. Protective clothing. General requirements
GOST ISO 3758-2014: Textiles. Care labelling code using symbols
Order 357n: Standard norms for the free issuance of special clothing, special footwear and other personal protective equipment to workers engaged in work with harmful and (or) hazardous working conditions, as well as in work performed in special temperature conditions or associated with pollution
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.