FR 1.31.2005.01753
ФР 1.31.2005.01753
|
|
Quantitative chemical analysis of water. Measurement procedure for mass concentration of total mercury in wastewater, natural surface and groundwaters using the photometric method with dithizone
Количественный химический анализ вод. Методика выполнения измерений массовой концентрации ртути общей в сточных, природных поверхностных и подземных водах фотометрическим методом с дитизоном
Status: Effective. MVI Validation certificate No. 16-05 of March 1, 2005
The technique is designed to measure the mass concentration of total mercury in industrial, domestic wastewater before and after biological treatment, natural surface and groundwater by the photometric method with dithizone
Методика предназначена для измерения массовой концентрации ртути общей в промышленных, хозяйственно-бытовых сточных водах до и после биологической очистки, природных поверхностных и подземных водах фотометрическим методом с дитизоном.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal State Institution Center for Environmental Control and Analysis,
8/6/2002
SKU: RUSS372253
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.2 Rationing impact on water bodies »
2.2.1 Rationing of quality of water bodies »
2.2.1.1 General requirements for composition and properties of surface waters »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.30 Wastewater »
The Document References:
GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications
GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.031-83: Occupational safety standards system. Work with mercury. Safety requirements
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 20015-88: Chloroform. Specifications
GOST 20490-75: Reagents. Potassium permanganate. Specifications
GOST 2053-77: Reagents. Sodium sulphide 9-aqueous. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 29169-91: Laboratory glassware. One-mark pipettes
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 31861-2012: Water. General requirements for sampling
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 3773-72: Reagents. Ammonium chloride. Specifications
GOST 4139-75: Reagents. Potassium thiocyanate. Specifications
GOST 4160-74: Reagents. Potassium bromide. Specifications
GOST 4172-76: Reagents. Disodium hydrogen phosphate dodecahydrate. Specification
GOST 4201-79: Reagents. Sodium bicarbonate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4220-75: Reagents. Potassium bichromate. Specifications
GOST 4221-76: Reagents. Potassium carbonate. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 4517-87: Reagents. Methods for preparation of accessory reagents and solutions used for analysis
GOST 4520-78: Reagents. Mercury (II) nitrate monohydrate. Specifications
GOST 5456-79: Reagents. Hydroxilamine hydrochloride. Specifications
GOST 61-75: Reagents. Acetic acid. Specifications
GOST 6709-72: Distilled water. Specifications
GOST OIML R 76-1-2011: State system for ensuring the uniformity of measurements. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
SanPiN 4607-88: Sanitary rules governing working with mercury, its compounds, and mercury-filled instruments.
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
