Vessels and apparatuses. General specifications for the repair of buildings
Сосуды и аппараты. Общие технические условия на ремонт корпусов
Status: Valid - Supersedes
Specifications are the guiding document for the repair and reconstruction of steel welded vessels and apparatuses with wall thicknesses from 4 to 120 mm, operating under pressure up to 16 MPa (16 kgf
Технические условия являются руководящим документом при ремонте и реконструкции стальных сварных сосудов и аппаратов с толщиной стенки от 4 до 120 мм, работающих под давлением до 16 МПа (16 кгс/cм2) и температуре не ниже минус 70 градусов Цельсия и не выше 540 градусов Цельсия на нефтеперерабатывающих, нефтехимических и других взрывопожарных производствах
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Energy of the Russian Federation, Department of the Oil and Oil Refining Industry,
8/17/2001
SKU: RUSS372550
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
As a Replacement Of:
OTU 2-92: Vessels and apparatuses. General specifications for the repair of buildings
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12169-82: Steel blanks for oxygen cutting. Allowances
GOST 13585-68: Steel. The bead method for determining the allowed welding and building procedures.
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality
GOST 15467-79: Product quality control. Basic concepts. Terms and definitions
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16098-80: Welded joints of clad corrosion resistant steel. Main types, design elements and dimensions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19521-74: Welding of metals
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 20072-74: Heat-resistant steel
GOST 20415-82: Non-destructive testing. Acoustic methods. General principles
GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 2246-70: Welding steel wire. Specifications
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 26159-84: Cast iron vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 3242-79: Welded joints
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7122-81: Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8233-56: Steel. Microstructure standards
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST 9931-85: The cylindrical shells of the steel welded vessels and apparatus. Types, main characteristics and dimensions
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
RD 03-131-97: Regulations on Arrangement and Conducting of Acoustic-Emissive Control of Vessels, Units, Boilers and Process Pipelines
RD 04-265-99: Regulations of training and official evaluation of employees of enterprises operating hazardous production facilities under control of the Gosgortekhnadzor of Russia
RD 09-250-98: Procedure for safe repairs on chemical, petrochemical and oil hazardous production facilities
RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RDI 38.18.016-94: Instructions for ultrasonic control of welded joints for technological equipment.
RDI 38.18.017-94: Instructions for magnetic particle testing of equipment and welded joints.
RDI 38.18.019-95: Instructions for capillary testing of parts for production equipment, weld joints and overlays.
RDI 38.18.020-95: Instruction. Radiographic examination of welded joints of vessels, equipment and piping
RTM 26-44-82: Heat treatment of petrochemical equipment and its parts
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
