imgalt

SP 351.1325800.2017

СП 351.1325800.2017

Concrete and reinforced concrete designs from light concrete. Rules of design

Бетонные и железобетонные конструкции из легких бетонов. Правила проектирования

Status: Effective - Introduced for the first time

The set of rules applies to the design of concrete and reinforced concrete structures made of lightweight concrete that meet the requirements of GOST 25820 for buildings and structures for various purposes, operated in the climatic conditions of the Russian Federation (under the systematic influence of temperatures not higher than 50 degrees Celsius and not lower than minus 70 degrees Celsius), in an environment with a non-aggressive degree of exposure. The requirements of this set of rules do not apply to the design of structures: fiber-reinforced concrete, precast-monolithic; hollow slabs, structures with undercuts and capitals; concrete and reinforced concrete structures of hydraulic structures, bridges, pavements of roads and airfields and other special structures, as well as on structures made of concrete with an average density of over 2000 kg

Свод правил распространяется на проектирование бетонных и железобетонных конструкций из легких бетонов, удовлетворяющих требованиям ГОСТ 25820, для зданий и сооружений различного назначения, эксплуатируемых в климатических условиях Российской Федерации (при систематическом воздействии температур не выше 50 градусов Цельсия и не ниже минус 70 градусов Цельсия), в среде с неагрессивной степенью воздействия. Требования настоящего свода правил не распространяются на проектирование конструкций: фибробетонных, сборно-монолитных; пустотных плит, конструкций с подрезками и капителей; бетонных и железобетонных конструкций гидротехнических сооружений, мостов, покрытий автомобильных дорог и аэродромов и других специальных сооружений, а также на конструкции, изготовляемые из бетонов средней плотностью свыше 2000 кг/м3.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 11/25/2017

SKU: RUSS372635

Price: $1,763.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 32496-2013: Fillers porous for light concrete. Specifications

GOST 8736-93: Sand for construction works. Specifications

SP 112.13330.2011: Fire safety of buildings and works

SP 131.13330.2012: Building climatology

SP 131.13330.2018: Construction Climatology

SP 16.13330.2017: Steel structures

SP 20.13330.2016: Loads and actions

SP 28.13330.2017: Protection against corrosion of construction

SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules

SP 297.1325800.2017: Fiber reinforced concrete structures and precast products with non-steel fibers. Design rules

SP 339.1325800.2017: Designs from cellular concrete. Rules of design

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020

Order 50/pr: On the approval of changes in the estimated norms

SP 430.1325800.2018: Monolithic structural systems. Design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!