imgalt

SP 349.1325800.2017

СП 349.1325800.2017

Concrete and reinforced concrete structures. Rules of structural reinforcement and repair

Конструкции бетонные и железобетонные. Правила ремонта и усиления

Status: Effective - Introduced for the first time

This set of rules applies to the design of repair and reinforcement of concrete and reinforced concrete structures of buildings and structures for various purposes, operated in the climatic conditions of Russia (under the systematic influence of temperatures not higher than 50 ° C and not lower than minus 70 ° C). The requirements of this set of rules apply to the design and calculation of concrete and reinforced concrete structures reinforced with rolled steel, composite materials, as well as the repair of concrete and reinforced concrete structures made of heavy, fine-grained and lightweight structural concrete. When designing the repair and reinforcement of concrete and reinforced concrete structures intended for work in special operating conditions (under seismic influences, in conditions of high humidity, after a fire), additional requirements for reinforcements of such structures must be observed. The requirements of this set of rules do not apply to the design of reinforcement of concrete and reinforced concrete structures of hydraulic structures, bridges, transport tunnels, subways, pipes under embankments, road and airfield coatings, reinforced cement structures, as well as structures made from concrete with a density of less than 1600 and more than 2500 kg

Cвод правил распространяется на проектирование ремонта и усиления бетонных и железобетонных конструкций зданий и сооружений различного назначения, эксплуатируемых в климатических условиях России (при систематическом воздействии температур не выше 50 градусов Цельсия и не ниже минус 70 градусов Цельсия).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 12/12/2017

SKU: RUSS372642

Price: $1,732.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


The Document References:

Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"

Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions

Federal Law 184-FZ: About technical regulation

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GN 2.2.5.2308-07: Chemical factors of production environment. Tentative safe exposure levels (TSEL) for harmful substances in the air of the working zone

GOST 10181-2014: Concrete mixtures. Methods of testing

GOST 112-78: Meteorological glass thermometers

GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.

GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.2-78: Concretes. Method of determination of moisture content

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 16976-71: Coatings of lacquers and paints. Method for determination of chalking degree

GOST 17623-87: Concrete. Radioisotope method of average density determination

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 21718-84: Building materials. Dielectric method of measurement of moisture

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 31993-2013: Paint materials. Determination of film thickness

GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements

GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts

GOST 5382-91: Cements and materials for cement production. Chemical analysis methods

GOST 9.072-77: Unified system of corrosion and ageing protection. Paint coating. Terms and definitions

GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating

GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST R 52892-2007: Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST R 56731-2015: Anchors for use in concrete. Test methods

MI 41-88: State system for ensuring the uniformity of measurements. Method for measuring surface roughness parameters according to GOST 2789-73 by method of using profile devices

ODM 218.3.001-2010: Recommendations for the diagnosis of active corrosion of reinforcement in reinforced concrete structures of bridges on highways using the half-cell potential method

P 85-2001: Recommendations for data analysis and conducting field observations of stress-strain state, opening of seams and cracks in concrete and reinforced concrete structures

Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones

SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures

SP 122.13330.2023: Railroad and road tunnels

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 16.13330.2011: Steel structures

SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design

SP 20.13330.2016: Loads and actions

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 48.13330.2011: Organization of construction

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

GOST R 12.3.052-2020: Occupational safety standards system (SSBT). Construction. Anticorrosive works. Safety requirements

GOST R 59152-2020: Materials and systems for the protection and repair of concrete structures. Requirements for corrosion protection systems for steel reinforcement in concrete

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.

SP 46.13330.2012: Bridges and pipes

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!