SP 355.1325800.2017
СП 355.1325800.2017
|
|
Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
Конструкции каркасные железобетонные сборные одноэтажных зданий производственного назначения. Правила проектирования
Status: Effective - Introduced for the first time
This set of rules applies to the design of prefabricated reinforced concrete frames of one-story industrial buildings of mass application for all climatic zones of the Russian Federation, except for sites with a seismicity of 7 or more points and permafrost zones. The set of rules establishes requirements for the calculation and design of reinforced concrete structures from heavy, fine-grained and lightweight structural concrete. The set of rules does not apply to the construction of technically complex, unique one-story buildings and buildings with especially dangerous production
Свод правил распространяется на проектирование сборных железобетонных каркасов одноэтажных производственных зданий массового применения для всех природно-климатических зон Российской Федерации, кроме площадок сейсмичность 7 и более баллов и зон вечной мерзлоты.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/7/2017
SKU: RUSS372651
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 20213-2015: Reinforced concrete roof trusses. Specifications
GOST 20372-2015: Reinforced concrete rafter and longitudinal beams. Specifications
GOST 23009-2016: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)
GOST 23838-89: Buildings of enterprises. Parameters
GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications
GOST 25628.2-2016: Columns of reinforced concrete frame-free for single-stored buildings of enterprises. Specification
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 28042-2013: Reinforced concrete roofing slabs for industrial buildings. Specifications
GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 28984-2011: Modular coordination of construction dimensions. General.
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns
GOST 534-78: Overhead traveling cranes spans
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST R 52085-2003: Formworks. General specifications
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Resolution 1038: Regulations on the Ministry of Construction, Housing and Communal Services of the Russian Federation
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2017: Steel structures
SP 20.13330.2016: Loads and actions
SP 22.13330.2016: Soil bases of buildings and structures
SP 24.13330.2011: Pile foundations
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 28.13330.2017: Protection against corrosion of construction
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 52.13330.2016: Daylighting and artificial lighting
SP 56.13330.2011: Industrial buildings
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.