SP 81.13330.2017
СП 81.13330.2017
|
|
The reclamation systems and construction
Мелиоративные системы и сооружения
Status: Effective
This set of rules establishes general requirements for the construction of new and reconstruction of existing reclamation systems and structures
Свод правил устанавливает общие требования к строительству новых и реконструкции действующих мелиоративных систем и сооружений
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
11/25/2017
SKU: RUSS372712
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.2 Hydraulic structures for industries »
ISO classifier »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.35 Irrigation and drainage equipment »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
National standards »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
As a Replacement Of:
SP 81.13330.2011: Reclamation systems and facilities
The Document References:
Code 200-FZ: Forest Code of the Russian Federation
Code 74-FZ: Water Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
Federal Law 4-FZ: Land Remediation
Federal Law 7-FZ: Environmental Protection
Federal Law 89-FZ: Production and Consumption Wastes
GOST 12.1.046-2014: Occupational safety standards system. Building. Lighting of building sites
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 14236-81: Polymer films. Tensile strength test method
GOST 16265-89: Earth cultivation. Terms and definitions
GOST 17.5.3.04-83: Nature protection. Lands. Reclamation general requirements
GOST 19179-73: Hydrology of land. Terms and definitions
GOST 19185-73: Hydraulic engineering. Basic concepts. Terms and definitions
GOST 27036-86: Bellows metal expansion joints and seals
GOST 30780-2002: Steel vessels and apparatus. Bellows-type expansion joints. Strength calculation methods
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics
GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements
GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements
PB 13-407-01: Uniform Safety Requirements for Blasting Operations
SN 452-73: Standards for the Allocation of Land for Trunk Pipelines
SN 456-73: Norms of allotment of lands for main water pipelines and sewage headers
SN 474-75: Land Allocation Standards for Irrigation and Drainage Canals
SP 100.13330.2016: The reclamation systems and construction
SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 126.13330.2012: Survey operations in construction
SP 129.13330.2011: External water supply networks and sewerage systems
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 36.13330.2012: Trunk pipelines
SP 45.13330.2017: Earthworks, grounds and footings
SP 48.13330.2011: Organization of construction
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 68.13330.2017: Acceptance into operation completed construction objects. Basic provisions
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 78.13330.2012: Automobile roads
SP 80.13330.2016: River hydraulie engineering facilities
SP 82.13330.2016: Territory improvement
VSN 003-88: Design and Installation Guidelines to Plastic Piping
VSN 004-88: Construction of trunk pipelines. Technology and management.
VSN 114-82: Acceptance and Commissioning Procedures for Completed Agricultural Facilities, Buildings, and Structures
The Document is Referenced By:
GOST R 58331.1-2018: Systems and facilities reclamation. Irrigation canals. Cross sections
GOST R 70524-2022: Land reclamation systems and structures. Rules of acceptance into operation
GOST R 70525-2022: Land reclamation. Cultural and technical works. General requirements.
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
SP 421.1325800.2018: Reclamation systems and facilities. Terms of Use
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.