GOST EN 280-2016
ГОСТ EN 280-2016
|
|
Mobile working platforms. Design calculations. Sustainability criteria. Security. Control and testing
Платформы рабочие мобильные подъемные. Расчеты конструкции. Критерии устойчивости. Безопасность. Контроль и испытания
Status: Applied in the EAEU
The standard establishes safety requirements and protective measures for all types and sizes of mobile lifting work platforms (MPRP), designed to move workers to workplaces where they perform work from the work platform, and work personnel enter the work platform and leave it only from the provisions ground level or chassis access. The standard is used in design calculations and stability criteria, safety checks and tests before putting the MPRP into operation. The standard identifies hazards arising from the use of the MPRP and describes how to eliminate or reduce these hazards. The standard does not address hazards arising from: operation in potentially explosive atmospheres; electromagnetic incompatibility; when working with live electrical systems; the use of compressed gases for load sensing components; climbing to the platform and leaving during a change in the working level; special use (e.g. railroad, gravel) covered by national regulations (rules). The standard does not apply to: permanently installed machines serving stairwells (see for example EN 81-1 and EN 81-2, EN 12159); fire and rescue devices (see for example EN 1777); work stands without rails suspended from hoisting devices (see, for example, EN 1808); lifting workstations of operators in warehouses on a rail track and auxiliary equipment (for example, see, for example, EN 528); forklifts (see for example, EN 1756-1 and EN 1756-2); mast work platforms (see, for example, EN 1495); exhibition equipment; lift tables (see e.g. EN 1570-1); ground-based aerodrome equipment (see, for example, EN 1915-1 and EN 1915-2); lifting workplaces on industrial trucks (see e.g. EN 1726-2)
Стандарт устанавливает требования безопасности и защитные меры для всех типов и размеров мобильных подъемных рабочих платформ (далее — МПРП), предназначенных для перемещения рабочего персонала к рабочим местам, где они выполняют работы с рабочей платформы, причем рабочий персонал заходит на рабочую платформу и покидает ее только с положений доступа на уровне грунта или на шасси. Стандарт применяется при расчетах конструкции и критерия устойчивости, проверках безопасности и испытаниях перед вводом МПРП в эксплуатацию. Стандарт идентифицирует опасности, возникающие при использовании МПРП и описывает способы устранения или снижения этих опасностей.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Standard of the Republic of Belarus,
8/19/2016
SKU: RUSS373510
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST EN 349-2002: Safety of machines. Minimal distances for the prevention of jamming of human body members.
GOST ISO 12100-2013: Safety of machine tools. General principles for design. Risk assessment and risk reduction
GOST ISO 13849-1-2014: Safety of equipment. Elements of control systems related to safety. Part 1. General principles for design
GOST ISO 13857-2012: Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs
GOST ISO 3864-1-2013: Graphic symbols. Safety colours and safety signs. Part 1. Design principles for safety signs and safety markings
GOST MEK 60204-1-2002: Safety of machines. Electrical equipment for machined and devices. Part 1. General requirements
The Document is Referenced By:
Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
