imgalt

SP 393.1325800.2018

СП 393.1325800.2018

Pipelines trunk and field for oil and gas. Organization of construction production

Трубопроводы магистральные и промысловые для нефти и газа. Организация строительного производства

Status: Effective - Introduced for the first time

The set of rules applies to the construction of new ones and the reconstruction of existing ones, as well as to the commissioning of main and field pipelines for oil and gas and branches from them with a nominal diameter of up to DN1400 mm and overpressure of the medium not higher than 10 MPa for main pipelines, not higher than 32 MPa for field pipelines. The set of rules does not apply to the organization of the construction of trunk and field pipelines in offshore areas and in areas with seismicity of more than 8 points for underground and over 6 points for above-ground and on-site pipelines.

Cвод правил распространяется на строительство новых и реконструкцию действующих, а также на приемку в эксплуатацию магистральных и промысловых трубопроводов для нефти и газа и ответвлений от них номинальным диаметром до DN1400 мм и избыточным давлением среды не выше 10 МПа для магистральных трубопроводов, не выше 32 МПа для промысловых трубопроводов. Свод правил не распространяется на организацию строительства магистральных и промысловых трубопроводов на морских акваториях и в районах с сейсмичностью свыше 8 баллов для подземных и свыше 6 баллов для надземных и внутриплощадочных трубопроводов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 8/21/2018

SKU: RUSS373519

Price: $725.67



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » K.34 Main and field pipelines »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.10 Welding Processes »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.10 Welding Processes »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.020 Production and processing of oil and natural gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »


The Document References:

Code 136-FZ: Land Code of the Russian Federation

Code 190-FZ: Town Planning Code of the Russian Federation

Code 197-FZ: Labor Code of the Russian Federation

Code 200-FZ: Forest Code of the Russian Federation

Code 24-FZ: Code of Inland Water Transport of the Russian Federation

Code 74-FZ: Water Code of the Russian Federation

Decree 800: Rules for land reclamation and conservation

Federal Law 172-FZ: On anti-corruption expertise of regulatory legal acts and draft regulatory legal acts

Federal Law 257-FZ: On Roads and Road Activities in the Russian Federation and on Amending Certain Legislative Acts of the Russian Federation

Federal Law 27-FZ: About the internal troops of the Ministry of the Interior of the Russian Federation

Federal Law 33-FZ: About Specially Protected Natural Areas

Federal Law 7-FZ: Environmental Protection

Federal Law 89-FZ: Production and Consumption Wastes

Federal Law 96-FZ: Atmospheric Protection

GKINP 07-016-91: Rules for laying centers and reference points at the points of geodetic and levelling networks

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.046-2014: Occupational safety standards system. Building. Lighting of building sites

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements

GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 17.4.3.02-85: Nature protection. Soils. Requirement for fertile layer conservation in performing earth-moving

GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection

GOST 17.5.1.01-83: Nature protection. Land reclamation. Terms and definitions

GOST 17.5.3.04-83: Nature protection. Lands. Reclamation general requirements

GOST 17.5.3.05-84: Nature protection. Land reclamation. General requirements for lands to be backfilled

GOST 17461-84: Technology in logging industry. Terms and definitions

GOST 21.001-2013: System of design documents for construction. General principles

GOST 23274-84: Mobile buildings. Electrical devices. General specifications

GOST 23407-78: Fencings for building sites. Specifications

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 55507-2013: Operation of the river ports. Terms and definitions

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

ODM 218.3.014-2011: Evaluation method for technical condition of bridges and automobile roads.

ODN 218.010-98: Guidelines for the Design, Construction, and Operation of Ice Crossings

OND 1-84: Procedural Guidelines for the Review, Examination, and Conformity Assessment of Proposed Air Quality Protection Measures and for Issuing a Permit for Emission of Pollutants into the Atmosphere

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

Order 520: On the approval of the Federal norms and rules in the field of industrial safety "Instructions for localization and elimination of the consequences of accidents at hazardous production facilities where mining operations are carried out"

Order 520: On approval of the Regulations on the functional subsystem of the organization of work to prevent and eliminate oil and oil products spills on inland waterways from ships and objects of sea and river transport of the unified state system for the prevention and elimination of emergency situations

Order 520: Model regulation on a unified industrial safety and labor protection management system for organizations for the extraction (processing) of coal (oil shale)

Order 520: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities of main pipelines"

Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"

Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"

Order 605: Federal norms and rules in the field of industrial safety "Safety rules for blasting operations"

Order 96: Federal norms and rules in the field of industrial safety "General rules of explosion safety for explosion and fire hazardous chemical, petrochemical and oil refining industries"

PB 03-273-99: Rules for qualification test of welders and welding production specialists

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections

RD 11-04-2006: Procedure of state construction supervision inspections and issuing certificates of conformance of built, reconstructed and repaired capital construction objects with the requirements of technical regulations (norms and standards), other statutory norms and design documents

RD 11-05-2007: Instruction On Keeping Construction Log Book

RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.

Resolution 390: Fire safety rules in the Russian Federation

Resolution 417: Fire safety rules in forests

Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content

Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SP 104.13330.2016: Ground protection from flooding and underflooding

SP 112.13330.2011: Fire safety of buildings and works

SP 113.13330.2016: Parkings

SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.

SP 119.13330.2017: Railways with 1520 mm track

SP 121.13330.2012: Aerodromes

SP 126.13330.2017: Geodetic works in building

SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 36.13330.2012: Trunk pipelines

SP 4.13130.2013: Systems of fire protection. Restriction of fire spread at object of defense. Requirements to special layout and structural decisions

SP 45.13330.2017: Earthworks, grounds and footings

SP 47.13330.2016: Engineering survey for construction. Basic principles

SP 48.13330.2011: Organization of construction

SP 68.13330.2017: Acceptance into operation completed construction objects. Basic provisions

SP 86.13330.2014: Main (Trunk) pipelines

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 79-81: Procedural Guidelines for Documenting Hydraulic Excavation Operations

The Document is Referenced By:

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 86.13330.2022: Trunk piping

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Waste paper and board. Specifications
Language: English
Price: $169.29
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $160.38
imgalt
Containers for blood and its components. Requirements for chemical and biological safety and methods of testing
Language: English
Price: $251.46
imgalt
Guidelines for gas chromatographic measurement of the content of cyclohexanone and cyclohexanol in the swabs on the skin
Language: English
Price: $478.01
imgalt
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $357.39
imgalt
Medical devices. Safety requirements. Methods of sanitation-chemical and toxicological tests
Language: English
Price: $223.74
imgalt
Gas chromatographic determination of hexane, heptane, acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, isopropanol, acrylonitrile, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, benzene, toluene, ethyl benzene, m-o, and
Language: English
Price: $225.72
imgalt
Technical regulations of Customs Union. About safety equipment for use in explosive environments
Language: English
Price: $80.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!