imgalt

SP 63.13330.2018

СП 63.13330.2018

Concrete and reinforced concrete structures. Key Points

Бетонные и железобетонные конструкции. Основные положения

Status: Effective

The set of rules applies to the design of concrete and reinforced concrete structures of buildings and structures for various purposes, operated in the climatic conditions of the Russian Federation (under the systematic influence of temperatures not higher than 50 degrees Celsius and not lower than minus 70 degrees Celsius), in an environment with a non-aggressive degree of impact.

Свод правил распространяется на проектирование бетонных и железобетонных конструкций зданий и сооружений различного назначения, эксплуатируемых в климатических условиях Российской Федерации (при систематическом воздействии температур не выше 50 градусов Цельсия и не ниже минус 70 градусов Цельсия), в среде с неагрессивной степенью воздействия.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 12/19/2018

SKU: RUSS373521

Price: $2,583.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


As a Replacement Of:

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10181-2014: Concrete mixtures. Methods of testing

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 31108-2016: General structural Portland clinker cements. Specifications

GOST 33530-2015: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34329-2017: Formworks. General specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 7566-94: Metal products

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 8736-2014: Sand for construction works. Specifications

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST R 52086-2003: Formworks. Terms and definitions

Order 965/pr: On approval of Amendments N 2 to SP 63.13330.2018 "SNiP 52-01-2003 Concrete and reinforced concrete structures. General provisions."

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 131.13330.2012: Building climatology

SP 131.13330.2018: Construction Climatology

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 16.13330.2017: Steel structures

SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)

SP 20.13330.2016: Loads and actions

SP 22.13330.2016: Soil bases of buildings and structures

SP 28.13330.2017: Protection against corrosion of construction

SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules

SP 297.1325800.2017: Fiber reinforced concrete structures and precast products with non-steel fibers. Design rules

SP 337.1325800.2017: Composite precast and in-situ reinforced concrete construction. Design rules

SP 360.1325800.2017: Steel fiber reinforced concrete structures. Design rules

SP 405.1325800.2018: Concrete structures with non-metallic fiber and polymer reinforcement. Design rules

SP 48.13330.2011: Organization of construction

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

Amendment 4: Amendment to SP 43.13330.2012 SNiP 2.09.03-85 Structures of industrial enterprises

Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts

Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures

Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"

GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters

GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 58341.12-2022: Structures of Buildings and Structures of Nuclear Power Plants. Accounting of actually worked out and estimation of residual resource

GOST R 58622-2019: The main pipeline transport of oil and oil products. Methodology for assessing the strength, stability and durability of a vertical steel tank

GOST R 59489-2021: Automobile roads for general use. Bridge structures. Rules for combining split beam spans into temperature-continuous ones on a reinforced concrete slab of the carriageway

GOST R 59583-2021: Translucent enclosing constructions. Glazing of balconies. Rules and control of installation work

GOST R 59622-2021: Public roads for motor vehicles. Bridge structures. Design of reinforced concrete elements

GOST R 59626-2022: Public roads Special auxiliary structures and devices for bridge construction. Design rules. General requirements

GOST R 59957-2021: Concrete and ferroconcrete wall blocks for buildings. General specifications

GOST R 59964-2021: Composite reinforced concrete structures for nuclear power plants with permanent steel-fiberconcrete formwork. Calculation and design

GOST R 59998-2022: Antitrap devices for security from vehicles. General technical requirements and test methods

GOST R 70344-2022: Translucent enclosing structures. Works on the construction of skylights. General requirements for the manufacture and control of works

GOST R 70400.3-2023: Ammunition and special chemical industry. Perforated protective cabins for explosive industries. Technical requirements and strength assessment

GOST R 70416-2023: Reinforced Concrete Protective Shells of Nuclear Power Plant Units. Strength calculation at the design stage

GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements

GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions

GOST R 70831-2023: Oil and gas industry. Oil and gas field offshore stationary structures. Design and construction rules

GOST R 70919-2023: System of threaded mechanical connections of reinforcement of reinforced concrete structures of nuclear power plants. General requirements, conformity assessment and identification

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 965/pr: On approval of Amendments N 2 to SP 63.13330.2018 "SNiP 52-01-2003 Concrete and reinforced concrete structures. General provisions."

Order 99/pr: On the approval of the Plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes of practice for 2021.

Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985

Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"

SP 113.13330.2023: Parking lots

SP 121.13330.2019: Airdromes

SP 122.13330.2023: Railroad and road tunnels

SP 15.13330.2012: Masonry and reinforced masonry structures

SP 22.13330.2016: Soil bases of buildings and structures

SP 248.1325800.2023: Underground structures. Design rules

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88

SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions

SP 28.13330.2017: Protection against corrosion of construction

SP 285.1325800.2016: Football stadiums. Desing rules

SP 375.1325800.2023: Industrial flue pipes. Design rules

SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements

SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules

SP 413.1325800.2018: Buildings and structures subject to dynamic effects. Design rules

SP 430.1325800.2018: Monolithic structural systems. Design rules

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 436.1325800.2018: Engineering protection of territories, buildings and structures from landslides and landslides. Design rules

SP 442.1325800.2019: Buildings and constructions. Earthquake Rating

SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules

SP 457.1325800.2019: Sports facilities for cycling. Design rules

SP 457.1325800.2019: Sports facilities for cycling. Design rules

SP 459.1325800.2019: Sports facilities for rowing sports. Design rules

SP 465.132500.2019: Buildings and constructions. Subway vibration protection. Design rules

SP 465.1325800.2019: Buildings and constructions. Subway vibration protection. Design rules

SP 468.1325800.2019: Concrete and reinforced concrete structures. Rules for ensuring fire resistance and fire safety

SP 469.1325800.2019: The construction of livestock, poultry and animal husbandry enterprises. Terms of Use

SP 509.1325800.2021: Prisons. Design rules

SP 56.13330.2021: Industrial buildings SNiP 31-03-2001

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!