GOST 34513-2018
ГОСТ 34513-2018
|
|
Non-destructive testing system for railway products. Key Points
Система неразрушающего контроля продукции железнодорожного назначения. Основные положения
Status: The document is enacted from 01.09.2019. Registration information 15-st dated January 30, 2019 (official site of Rosstandart) September 1, 2019
The standard applies to railway products at the main stages of its life cycle - during design, production and operation (including maintenance and repair), and establishes requirements for its non-destructive testing (NDT) system, including the requirements for: - organization, conditions and the procedure for conducting NK; - types and methods of tax code; - normative and technological documentation for the tax code; - means of the Tax Code; - qualifications of personnel in the field of NK. The requirements of this standard are intended for use at enterprises and organizations of all forms of ownership that carry out the development of regulatory documents on taxation, certification of personnel in the field of taxation, design, manufacture and operation of products subject to taxation, and
Стандарт распространяется на продукцию железнодорожного назначения на основных стадиях ее жизненного цикла - при проектировании, производстве и эксплуатации (в том числе техническом обслуживании и ремонте), и устанавливает требования к системе ее неразрушающего контроля (НК), включая требования: - к организации, условиям и порядку проведения НК; - видам и методам НК; - нормативной и технологической документации по НК; - средствам НК; - квалификации персонала в области НК. Требования настоящего стандарта предназначены для применения на предприятиях и в организациях всех форм собственности, выполняющих разработку нормативных документов по НК, сертификацию персонала в области НК, проектирование, изготовление и эксплуатацию продукции, подлежащей НК, и/или осуществляющих НК продукции.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
1/30/2019
SKU: RUSS373592
The Product is Contained in the Following Classifiers:
ISO classifier »
19 TESTS »
19.100 Non-destructive testing »
National standards »
19 TESTS »
19.100 Non-destructive testing »
ISO classifier »
45 RAILWAY ENGINEERING »
45.040 Materials and components for railway equipment »
National standards »
45 RAILWAY ENGINEERING »
45.040 Materials and components for railway equipment »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
National standards »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
The Document References:
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-2017: Occupational safety standards system. Electrical safety. General requirements and nomenclature of types of protection
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.4.120-83: Occupational safety standards system. Means of the collective protection against ionizing radiation. General technical requirements
GOST 15.902-2014: System of development and launching into manufacture. Railway rolling stock. Procedure of development and launching into manufacture
GOST 15467-79: Product quality control. Basic concepts. Terms and definitions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation
GOST 20911-89: Technical diagnostics. Terms and definitions
GOST 23479-79: Non-destructive testing. Optic methods. General requirements
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3.1102-2011: Unified system of technological documentation. Stages of designing and types of documents. General principles
GOST 3.1502-85: Unified system for technological documentation. Forms and rules of making documents on technical control
GOST 32894-2014: Railway application. Inspection control. General provisions
GOST 33514-2015: Railway application. Verification of non-destructive testing techniques
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 54795-2011: Non-destructive testing. Qualification and certification of personnel. General principles
GOST R 56542-2015: Non-destructive testing. Classification of types and methods
The Document is Referenced By:
GOST 34524-2019: Rails are railway. Non-destructive testing in operating conditions. General requirements
GOST 34650-2020: Solid-rolled wheels and wheelset tires for railway rolling stock. Non-destructive testing methods
GOST 34656-2020: Axles of wheelsets of railway rolling stock. Non-destructive testing methods
GOST 34657-2020: Cast and rolled wheel centers for railway rolling stock. Non-destructive testing methods
GOST 34663-2020: The joints of rails and turnouts are welded. Non-destructive testing methods
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
