imgalt

SP 406.1325800.2018

СП 406.1325800.2018

Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation

Трубопроводы магистральные и промысловые стальные для нефти и газа. Монтажные работы. Сварка и контроль ее выполнения

Status: Effective - Introduced for the first time

The set of rules applies to field and main steel pipelines and establishes the basic requirements for welding, quality control of welded joints during construction, reconstruction, overhaul and construction monitoring of the quality of construction and installation works on the linear part of main pipelines of all categories according to SP 86.13330 for oil, oil products and gas with diameters up to 1420 mm inclusive with an overpressure of the medium up to 10.0 MPa inclusive, as well as field pipes boprovodov GOST P 55990 and SP 284.1325800 transporting not containing corrosive components of oil and gas pressurized medium to 32 MPa.

Свод правил распространяется на промысловые и магистральные стальные трубопроводы и устанавливает основные требования к выполнению сварочных работ, контролю качества сварных соединений при строительстве, реконструкции, капитальном ремонте и проведении строительного контроля за качеством строительно-монтажных работ на линейной части магистральных трубопроводов всех категорий согласно СП 86.13330 для нефти, нефтепродуктов и газа диаметрами до 1420 мм включительно с избыточным давлением среды до 10,0 МПа включительно, а также промысловых трубопроводов по ГОСТ Р 55990 и СП 284.1325800, транспортирующих не содержащие коррозионно-активные компоненты нефть и газ под избыточным давлением среды до 32 МПа.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 9/19/2018

SKU: RUSS373674

Price: $566.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » K.34 Main and field pipelines »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.020 Production and processing of oil and natural gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10157-2016: Gaseous and liquid argon. Specifications

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 20426-82: Radiation methods of defectoscopy

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8050-85: Carbon dioxide,

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST ISO 17636-2-2017: Non-destructive testing of welds. Radiographic testing. Part 2. X- and gamma-ray control techniques with digital detectors

GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R ISO 17659-2009: Welding. Multilingual terms for welded joints

GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions

Order 490: Federal norms and rules in the field of industrial safety "Basic requirements for non-destructive testing of technical devices, buildings and structures at hazardous production facilities"

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.

PB 03-440-02: Attestation rules for nondestructive inspection personnel

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RD 03-606-03: Instructions for visual and measuring control

RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities

RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

SanPiN 2.6.1.1281-03: Sanitary rules on the radiation safety of personnel and the public during transportation of radioactive materials (substances)

SanPiN 2.6.1.2523-09: Norms of radiation safety

SanPiN 2.6.1.3164-14: Hygienic requirements for ensuring radiation safety during X-ray inspection

SP 2.6.1.2612-10: Basic sanitary rules for radiation safety

SP 2.6.1.3241-14: Hygienic requirements to radiation safety assurance during radionuclide examination

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 36.13330.2012: Trunk pipelines

SP 86.13330.2014: Main (Trunk) pipelines

The Document is Referenced By:

GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading

GOST 34826-2022: Trunk pipeline transport of oil and petroleum products. Linear part. Organization and production of construction and installation works

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!