GOST R 58358.3-2019
ГОСТ Р 58358.3-2019
|
|
Basic supporting structures of the third level of electronic equipment. General specifications
Конструкции несущие базовые третьего уровня радиоэлектронных средств. Общие технические условия
Status: Effective - Introduced for the first time. IUS 5-2019
The standard applies to the basic supporting structures of the third level of industrial electronic equipment and establishes general technical conditions.
Стандарт распространяется на базовые несущие конструкции третьего уровня радиоэлектронных средств промышленного назначения и устанавливает общие технические условия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/26/2019
SKU: RUSS373686
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
31 Electronics »
ISO classifier »
31 ELECTRONICS »
31.240 Mechanical structures of electronic equipment »
National standards »
31 ELECTRONICS »
31.240 Mechanical structures of electronic equipment »
National Standards for OKSTU »
RADAR AND RADIO ENGINEERING EQUIPMENT »
Calculation and design standards. Technical documentation »
The Document References:
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 14.201-83: Provision of technological efficiency of products design. General requirements
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 18620-86: Electrotechnical articles
GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23586-96: Electrical wiring of radio-electronic equipment and devices. Technical requirements for wire harnesses and their mounting
GOST 23592-96: Electrical wiring of radio-electronic equipment and devices. General requirements for three-dimensional wiring of electronic and electrical devices
GOST 23872-79: Electromagnetic compatibility of radio-electronic equipment. Nomenclature of parameters and technical data classification
GOST 27.003-2016: Reliability in technology. Composition and general rules for setting reliability requirements
GOST 30631-99: General requirements for machines, instruments and other industrial products as to environment mechanical stability
GOST 9.005-72: Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST R 51623-2000: Mechanical structure designs of electronic equipment. Construction system and coordinating sizes
GOST R 51676-2000: Mechanical structure designs of electronic equipment. Terms and definitions
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
GOST R 52003-2003: Subdivision levels of radio electronic equipment. Terms and definitions
GOST R 52420-2005: Base carrying mechanical structures. Systems of secondary power supplies. Types and basic dimensions
GOST R 56542-2015: Non-destructive testing. Classification of types and methods
GOST R 56970-2016: Construction of bearing base electronic. The management cabinets, meet the standards of the series IEC 60297 and IEC 60917. Part 1. Design Guide. Sizes of interface and position on the thermo-electric systems of cooling (effect of Пельтье)
GOST R 56972-2016: Construction of bearing base electronic. The management cabinets, meet the standards of the series IEC 60297 and IEC 60917. Part 2. Design Guide. A method of determining the design of forced-air cooling
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R IEC 60297-3-101-2006: Mechanical structures for radio-electronic equipment. Subracks and associated plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
GOST R IEC 60297-3-104-2009: Mechanical structures for electronic equipment. Connector dependent interface dimensions of subracks and plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
GOST R IEC 60917-1-2011: Modular order for the development of mechanical structures for electronic equipment practices. Part 1. Generic standard
GOST R IEC 60917-2-1-2011: Modular order for the development of mechanical structures for electronic equipment practices. Part 2. Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Section 1. Detail specification. Dimensions for cabinets an
GOST R IEC 61587-1-2013: Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 1. Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
GOST R IEC 61587-3-2013: Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 3. Electromagnetic shielding performance tests for cabinets, racks and subracks
GOST R IEC 61969-1-2013: Mechanical structures for electronic equipment. Outdoor enclosures. Design guidelines
GOST R IEC 61969-2-2013: Mechanical structures for electronic equipment. Outdoor enclosures. Dimensions of cabinets
GOST R IEC 61969-3-2015: Mechanical structures for electronic equipment. Outdoor enclosures. Part 3. The environmental demands concern, testing and safety
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
GOST R ISO 9001-2015: Quality management systems. Requirements
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
RD 50-9.645-87: Guidelines. General requirements for the selection of metals and alloys used without coatings in atmospheric conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
