GOST R 58367-2019

ГОСТ Р 58367-2019

Arrangement of oil fields on land. Technological design

Обустройство месторождений нефти на суше. Технологическое проектирование

Status: Effective - Introduced for the first time. IUS 5-2019

The standard establishes the rules for the design of facilities (technological infrastructure) for oil, gas, oil, gas and oil and gas condensate fields (hereinafter referred to as oil fields) located in the Russian Federation. The standard should be guided by the design of facilities (technological infrastructure) for capital construction on land for oil fields. The standard applies to the design of new facilities, reconstruction, and technical re-equipment of facilities for the development of oil fields. The standard does not apply to the design of facilities (technological infrastructure) for the capital construction of land facilities for gas and gas condensate fields, as well as gas condensate and gas reservoirs of gas and oil, oil and gas and oil and gas condensate fields. The standard does not apply to the design of facilities (technological infrastructure) during capital construction:

Стандарт устанавливает правила проектирования объектов обустройства (технологической инфраструктуры) нефтяных, газонефтяных, нефтегазовых и нефтегазоконденсатных месторождений (далее - месторождения нефти), расположенных на территории Российской Федерации. Стандартом следует руководствоваться при проектировании объектов обустройства (технологической инфраструктуры) при капитальном строительстве на суше для месторождений нефти. Стандарт распространяется на проектирование новых, реконструкцию, техническое перевооружение объектов обустройства месторождений нефти. Стандарт не распространяется на проектирование объектов обустройства (технологической инфраструктуры) при капитальном строительстве объектов на суше для газовых и газоконденсатных месторождений, а также газоконденсатных и газовых пластов газонефтяных, нефтегазовых и нефтегазоконденсатных месторождений. Стандарт не распространяется на проектирование объектов обустройства (технологической инфраструктуры) при капитальном строительстве:

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 124

Approved: Federal Agency for Technical Regulation and Metrology, 3/12/2019

SKU: RUSS373798

Price: $1,434.99




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 4 Ensuring environmental safety during subsoil use » 4.2 Use and protection of subsoil » 4.2.3 Environmental safety requirements for exploration, extraction of groundwater and minerals »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.020 Production and processing of oil and natural gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.020 Production and processing of oil and natural gas »


The Document References:

Code 190-FZ: Town Planning Code of the Russian Federation

Code 200-FZ: Forest Code of the Russian Federation

Code 74-FZ: Water Code of the Russian Federation

Federal Law 137-FZ: Enactment of the Russian Federation Land Code

Federal Law 162-FZ: About standardization in the Russian Federation

Federal Law 166-FZ: On fishing and conservation of aquatic biological resources

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

Federal Law 33-FZ: About Specially Protected Natural Areas

Federal Law 412-FZ: On accreditation in the national accreditation system

Federal Law 49-FZ: On the territories of traditional nature management of the indigenous peoples of the North, Siberia and the Far East of the Russian Federation

Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being

Federal Law 69-FZ: Fire Safety

Federal Law 73-FZ: On objects of cultural heritage (historical and cultural monuments) of the peoples of the Russian Federation

Federal Law 7-FZ: Environmental Protection

Federal Law 82-FZ: On the minimum wage

Federal Law 89-FZ: Production and Consumption Wastes

Federal Law 96-FZ: Atmospheric Protection

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity

GOST 13846-2003: Fountain and discharge fittings. Standard lay-outs, main parameters and general technical requirements to the design

GOST 13862-90: Blowout prevention equipment. Standard schemes, basic parameters and technical design requirements

GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1581-96: Well Portland cements. Specifications.

GOST 16293-89: Complete drilling rigs for development and deep exploratory drilling. Basic parameters

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 21.408-2013: System of design documents for construction. Rules of industrial process automation working documentation execution

GOST 21.701-2013: System of building design documents. Rules of executing of working documentation for motor-ways

GOST 2517-2012: Petroleum and petroleum products. Methods of sampling

GOST 28996-91: Oil-field wellhead equipment. Terms and definitions

GOST 30196-94: Gasing heads. Standard schemes, basic parameters and connection sizes

GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods

GOST 30852.13-2002: Explosionproof electrical apparatus.. Part 14. Electrical installations in explosive gas atmospheres (other than mines)

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31370-2008: Natural gas. Sampling guidelines

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31446-2017: Steel casing and tubing pipes for the oil and gas industry. General technical conditions

GOST 31610.10-2012: Electrical apparatus for explosive gas atmospheres. Part 10. Classification of hazardous areas

GOST 31610.10-2-2017: Explosive atmospheres. Part 10-2. Classification of areas. Explosive dust atmospheres

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 32358-2013: Oil and gas wells. Geophysical researches and works in wells. General requirements

GOST 32388-2013: Process piping. Standard for the stress, vibration and seismic analysis

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32843-2014: Automobile roads of general use. Delineator posts. Technical requirements

GOST 32945-2014: Public roads. Road signs. Technical specifications

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making

GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development

GOST 34.603-92: Information technology. Types tests automated systems

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34396-2018: Oil and oil products custody transfer metering systems. General specifications

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 464-79: Grounds for stationary telegraph and telephone installations, wire-broadcasting distribution points, radio-relay stations and CATV antennas. Resistance norms

GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications

GOST 632-80: Casing pipes and couplings for them. Specifications

GOST 8.611-2013: State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Procedure for measurements of by ultrasonic meters

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.039-74: Unified system of corrosion and ageing protection. Corrosive aggressiveness of atmosphere

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9544-2015: Pipeline valves. Leakage rates of valves

GOST IEC 60079-29-2-2013: Explosive atmospheres. Part 29-2. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 50970-2011: Тгаffic contгol devices. Guide posts. General technical requirements. Application rules

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51317.6.5-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in power stations and substations. Requirements and test methods

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51858-2002: Crude petroleum. General specifications

GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications

GOST R 53246-2008: Information technologies. Structured cabling systems. Main system elements design. General requirements

GOST R 53554-2009: Prospecting, exploration and development of hydrocarbon deposits. Terms and definitions

GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons

GOST R 53679-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 1. General principles for selection of cracking-resistant materials

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 53713-2009: Oil and gas-oil fields. Rules of development

GOST R 54362-2011: Well logging. Terms and definitions

GOST R 54910-2012: Gas-condensate and oil-and-gas-condensate deposits. Gas-condensate characteristics of hydrocarbons. Terms and definitions

GOST R 54973-2012: Processing of associated gas. Terms and definitions

GOST R 55288-2012: Drill stem testing tools. Downhole and wellhead equipment. General technical requirements

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

GOST R 8.591-2002: State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users

GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements

GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements

GOST R 8.740-2011: State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Measurements procedure by turbine, rotary and vortex flow meters and gas meters

MI 2693-2001: Crude Oil Metering Oil Production Facilities

MI 3532-2015: State system for ensuring the uniformity of measurements. Recommendations on definition of weight of oil at registration operations with application quantity measures and indicators of oil quality

Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

Order 461: On approval of federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"

Order 461: Federal norms and rules in the field of industrial safety "Industrial safety rules for warehouses of oil and oil products"

Order 461: Requirements for the content of a mining allotment project, the form of a mining allotment act, graphic annexes, a mining allotment plan and maintaining a register of documents certifying the specified boundaries of a mining allotment

Resolution 1029: Criteria for classifying objects that have a negative impact on the environment to objects of I, II, III and IV categories

Resolution 730: Regulations on the development of action plans for the containment and elimination of the consequences of accidents at hazardous production facilities

Resolution 730: Regulations on the admission of Russian carriers to the implementation of international road transport

RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation

SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control

SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones

SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings

SNiP 3.05.05-84: Processing equipment and process pipelines

SP 124.13330.2012: Heating networks

SP 133.13330.2012: Networks of wire broadcasting and anouncements in buildings and facilities. Design norms

SP 134.13330.2012: Telecommunication systems of buildings and facilities. Design basic provisions

SP 16.13330.2011: Steel structures

SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen

SP 18.13330.2011: Master plans for industrial enterprises

SP 20.13330.2011: Loads and impacts

SP 231.1311500.2015: Arrangement oil and gas fields. Fire safety requirements

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 254.1325800.2016: Buildings and territories. Rules for designing of industrial sound protection

SP 28.13330.2017: Protection against corrosion of construction

SP 30.13330.2016: Domestic water supply and drainage systems in buildings

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 36.13330.2012: Trunk pipelines

SP 37.13330.2012: Industrial transport

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 46.13330.2012: Bridges and pipes

SP 51.13330.2011: Noise protection and rooms acoustics.

SP 60.13330.2016: Heating, ventilation and air conditioning

SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines

SP 62.13330.2011: Gas distribution systems

SP 75.13330.2011: Technological equipment and technological pipelines

SP 89.13330.2016: Boiler installations

Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres

VNTP 01/87/04-84: Objects of gas and oil industry, made with the use of block and block-complete devices. Engineering Design Standards

VSN 21-77: Instruction on designing of heating and ventilation systems at oil refinery and petrochemical plants

VSN 26-90: Design guidelines for engineering and construction of highway roads for oil and gas fields in West Siberia

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!