SP 423.1325800.2018
СП 423.1325800.2018
|
|
Electrical installations low-voltage buildings and structures. Explosion hazard design guidelines
Электроустановки низковольтные зданий и сооружений. Правила проектирования во взрывоопасных зонах
Status: Effective - Introduced for the first time
The set of rules applies to all types of electrical equipment and electrical installations used in hazardous areas: stationary, temporary, mobile, portable and manual.
Свод правил распространяется на все виды электрооборудования и электроустановок, применяемых во взрывоопасных зонах: стационарные, временные, подвижные, переносные и ручные.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/24/2018
SKU: RUSS373817
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
k.31 Residential, public and industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 22782.3-77: Explosion-proof electrical equipment with special means
GOST 23619-79: Refractory heat-insulating mullite-silica glass-fibrous materials and products. Specifications
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST 31610.11-2012: Electric equipment for explosive atmospheres. Part 11. Equipment protection by intrinsic safety «i»
GOST 31610.11-2014: Explosive atmospheres. Part 1.1. The equipment with type of Ex-protection "intrinsically safe power circuit "i"
GOST 31610.15-2012: Electrical apparatus for explosive gas atmospheres. Part 15. Construction, test and marking of type of protection «n» electrical apparatus
GOST 31610.15-2014: Explosive atmospheres. Part 15. Equipment with type of protection
GOST 31610.26-2012: Explosive atmospheres. Part 26. Equipment with equipment protection level (EPL) Ga
GOST 31610.33-2014: Explosive atmospheres. Part 3.3. Equipment with special type of ex protection "s"
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST IEC 60034-1-2014: Rotating electrical machines. Part 1. Nominal values of the parameters and operational performance
GOST IEC 60079-10-1-2011: Explosive atmospheres. Part 10-1. Classification of areas. Explosive gas atmospheres
GOST IEC 60079-10-1-2013: Explosive atmospheres. Part 10-1. Classification of areas. Explosive gas atmospheres
GOST IEC 60079-10-2-2011: Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres
GOST IEC 60079-1-2011: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST IEC 60079-1-2013: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures «d»
GOST IEC 60079-14-2011: Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST IEC 60079-14-2013: Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST IEC 60079-17-2011: Explosive atmospheres. Part 17. Electrical installations inspection and maintenance
GOST IEC 60079-30-2-2011: Explosive atmospheres. Electrical resistance trace heating. Part 30-2. Application guide for design, installation and maintenance
GOST IEC 60331-21-2011: Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 21. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV.
GOST IEC 60332-1-2-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
GOST IEC 60332-2-2-2011: Tests on electric and optical cables under fire conditions. Part 2 -2. Test for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame
GOST IEC 60332-3-22-2011: Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
GOST IEC 61241-0-2011: Electrical apparatus for use in the presence of combustible dust. Part 0. General requirements
GOST IEC 61241-1-1-2011: Electrical apparatus for use in the presence of combustible dust. Part 1. Electrical apparatus protected by enclosures and surface temperature limitation. Section 1. Specification for apparatus
GOST IEC 61241-14-2011: Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
GOST IEC 61241-3-2011: Electrical apparatus for use in the presence of combustible dust. Part 3. Classification of areas
GOST R 50571.4.44-2019: Electrical installations are low voltage. Part 4.44. Protection for security. Protection against sudden voltage fluctuations and electromagnetic disturbances
GOST R 50571.5.52-2011: Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
GOST R 50571.5.54-2013: Low-voltage electrical installations. Part 5-54. Selection and erection of electrical equipment. Earthling arrangements, protective conductors and protective bonding conductors
GOST R 50571-4-44-2011: Low-voltage electrical installations. Part 4-44. Safety requirements. Protection against voltage disturbances and electromagnetic disturbances
GOST R 51326.1-99: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 1. General requirements and test methods
GOST R 53073-2008: High-pressure sodium vapour lamps. Performance requirements
GOST R 53280.2-2010: Automatic fire extinguishing systems. Fire extinguishing media. Part 2. Foams concentrate for subsurface extinguishing of fires oil and petroleum tanks. General technical requirements and test methods
GOST R 53310-2009: Through penetration for cables, hermetic inputs and through penetration of electric current types. Requirements of fire safety. Fire resistance test methods
GOST R 53316-2009: Cable lines. Circuit integrity under fire. Test method
GOST R IEC 60050-426-2011: International Electrotechnical Vocabulary. Part 426. Equipment for explosive atmospheres
GOST R IEC 60192-2011: Low-pressure sodium vapour lamps. Performance requirements
GOST R IEC 61386.1-2014: Conduit systems for cable management. Part 1. General requirements
GOST R IEC 62305-1-2010: Risk management. Protection against lightning. Part 1. General principles
Order 96: Federal norms and rules in the field of industrial safety "General rules of explosion safety for explosion and fire hazardous chemical, petrochemical and oil refining industries"
RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures
SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications
SP 12.13130.2009: Determination of categories of rooms, buildings and external installations for explosion and fire hazards
SP 18.13330.2011: Master plans for industrial enterprises
SP 52.13330.2016: Daylighting and artificial lighting
SP 6.13130.2013: Systems of fire protection. Electrical equipment. Requirements of fire safety
SP 76.13330.2016: Electrical systems
Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres
The Document is Referenced By:
GOST R 70348-2022: Trunk pipeline transport of oil and petroleum products. Marine stanchions. General specifications
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 99/pr: On the approval of the Plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes of practice for 2021.
PNST 682-2022: Oil and gas industry. Underwater production systems. Mobile and stationary offshore installations. Electrical equipment. Hazardous environments
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.