GOST R 58389-2019
ГОСТ Р 58389-2019
|
|
Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications
Профили стальные листовые гнутые с трапециевидными гофрами для сталежелезобетонных конструкций. Технические условия
Status: Effective - Introduced for the first time. IUS 6-2019
The standard applies to steel sheet corrugated profiles with a trapezoidal shape of the corrugation of various shapes and sizes, made on cold-rolled steel roll forming mills and intended for use in construction in monolithic steel-reinforced concrete floor slabs and coatings as an abandoned reinforcing formwork.
Стандарт распространяется на стальные листовые гофрированные профили с трапециевидной формой гофра различной формы, размеров, изготовленные на профилегибочных станах из холоднокатаной стали и предназначенные для применения в строительстве в плитах монолитных сталежелезобетонных перекрытий и покрытий в качестве оставляемой армирующей опалубки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/22/2019
SKU: RUSS373830
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.044-2018: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.029-88: Machine tool attachments
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 164-90: Vernier height gauges. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19281-2014: High strength rolled steel. General specification
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification
GOST 30775-2001: Resources saving. Waste treatment. Waste classification, identification and coding. Basic principles
GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications
GOST 3749-77: Checking 90° squares. Specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 9.517-2003: Unified system of corrosion and ageing protection. Temporary rust protection of products. Test methods
SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 28.13330.2017: Protection against corrosion of construction
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.